Feature 1. Use mainstream STM32F722 chip 2. Equipped with the latest 42688-P gyroscope 3. 512M black box storage 4. Support Bluetooth parameter tuning 5. Integrated LC filter 6. Upgrade type-C USB interface 7.With TAKER H65_8S_BLS 65A 4IN1 ESC, silky flight 8. Directly plugs into the DJI Air Unit 9. Simple and effective installation with shock-absorbing mounts for stable gyroscope performance 10. Integrated Barometer 11. [email protected] + 5V@3A dual independent BEC Specifications GEP-F722-BT-HD V3 Flight Controller MCU: STM32F722 IMU：ICM42688-P(SPI) Air Unit Connection: Directly plugs into the DJI Air Unit Black Box: 512M onboard Bluetooth: Supported Barometer: Supported USB Interface: Type-C OSD: BetaFlight OSD w/ AT7456E chip BEC: 5V@3A, [email protected] dual BEC Firmware Target: GEPRCF722_BT_HD_V3 Size: 36.9×36.9mm, hole: 30.5×30.5mm, φ4mm hole becomes φ3mm after using a silicone shock-absorbing ring Input Voltage: 3-6S LiPo UART: 5 groups (UART4 fixed for Bluetooth) Power Filter: Integrated LC filter Weight: 8.2g TAKER H65_8S_BLS 65A 4IN1 ESC Input Voltage: 3-8S Lipo Ammeter: Support Continue Current：65A Burst Current: 70A (5 second) Support Protocol: Dshot 150/300/600 Size: 42×45.7mm, hole: 30.5×30.5mm, φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring Weight: 14.9g Target: B_X_30 Includes 1 x FC board 1 x ESC board 1 x Capacitor 1 x O3 3-in-1 connection cable 1 x FC adapter cable 1 x sh1.0 4pin silicone cable 1 x Camera connection cable 1 x VTX connection cable 1 x XT60 power cable 4 x M3*30 screws 4 x M3*25 screws 8 x Nylon nuts 12 x Silicone anti-shake pads
