TAVY Thin-Skin Tile Underlayment 100 Sq. Ft. Roll Backordered Item with No ETA Add the classic touch of tile to any room! Features Two Part Underlayment System was developed to provide an underlayment for tile that could be installed over any surface without adding additional height to the sub-floor The Thin-Skin System is so simple that it can be installed by both professionals and DIYers It can be used with either modified or non-modified thin-set mortar Benefits Tested by Tile Council of America No need to buy or install nails/screws Increase tiling applications by eliminating tearouts of existing surfaces Allows for tile or stone to be set on any surface Lightweight and more accessible to transport (less than 15 lbs. per 100 square feet), NO dusty mess to clean up NO additional height is added to any surface as opposed to the current underlayments NO waste; all TAVY Thin-Skin Underlayment pieces are usable regardless of size and shape 25% - 50% lower cost than other underlayments One roll of TAVY Thin-Skin Underlayment 2.5' X 40' and one gallon of TAVY Thin-Skin #007 Glue will cover 100 square feet Thin-skin underlayment is ideal for making templates for difficult cuts Minimize overall load weight Crack suppression up to 1/8" over concrete Can Not Be Used For Waterproofing Steps to installing the TAVY THIN-SKIN Two-Part Tile Underlayment System 1. Clean the sub-surface of debris 2. Spread TAVY Thin-Skin #007 Glue 3. Install TAVY Thin-Skin Underlayment 4. Skim coat TAVY Thin-Skin Underlayment with mortar 5. Start setting tile! TOOLS REQUIRED Pencil, knife or scissors, 5/32" v-notched trowel (minimum), 5/32" v-notched spatula, latex modified mortar, putty knife, and margin trowel
