Point-Sound-Source Speaker System Technics’ newly developed flat coaxial two-way speaker unit combines a tweeter for high frequencies and a woofer for mid-range and bass. Because the tweeter is at the center of the woofer, the speaker acts as a point sound source, providing a coherent, integrated sound across the frequency range, without directional anomalies. As a result, the Technics Speaker System delivers a live superb soundstage focus, excellent imaging, and the ambiance required to deliver the ‘live music’ experience Phase Precision Driver (Flat Coaxial 2-Way Speaker Unit) The flat coaxial two-way speaker drive unit is an original Technics development, designed for the faithful reproduction of mid-range and high-frequency sound. The flat woofer diaphragm has a sandwich structure using lightweight, high-rigidity carbon fiber skins and a honeycomb core, and is designed for a highly accurate pistonic motion over a frequency range extending beyond the crossover frequency with the tweeter, thus ensuring smooth integration.The flat design eliminates the frequency anomalies due to the cavity effect caused by conventional cone diaphragms, while the magnetic circuit employs a large magnet, copper cap and shorting ring, and a short voice coil with concentrated edgewise winding for high power with low distortion. The drive unit chassis is in highly rigid die-cast aluminum, with the chassis ‘legs’ having a resonance dispersing structure to eliminate even the smallest unwanted vibration, to help the drive unit deliver accurate and powerful bass. High Rigidity Entasis Form Cabinet The SB-C700 cabinet is designed to support the Point Source drive units securely, preventing unwanted resonance and ensuring a smooth flow of sound without diffraction or reflection. The front baffle is designed for maximum stiffness and resonance-damping, while the side panels are convex high-rigidity boards with a maximum 42-mm thickness, designed to damp down resonance while also preventing internal reflections.The monocoque cabinet offers high rigidity, as each side of the cubic structure reinforces the adjacent panels. This reduces unwanted resonance by controlling the movement of the individual panels, as well as that of the structure as a whole, while internal acoustic absorbent material was selected, and its position optimized, to suit both a drive unit and the cabinet volume, thus suppressing undesired standing waves.The bass reflex port on the rear panel is of a ‘parabola’ design, its curvature continuously varying from the inlet to the outlet to suppress turbulence at the exit as well as flow noise within the port, thus delivering smooth and powerful bass sound with minimum noise.The glossy cabinet is created by repeated coating, sanding, polishing, and finishing with a high degree of craftsmanship. This creates a cabinet not just attractive to look at, but is also able to suppress fine vibrations generated at the enclosure surface, thus contributing to the accuracy of its sound. High-quality Network Circuit The High-quality Network Circuit was created as a result of extensive designing and listening, to maximize the performance of each speaker unit and achieve a balanced sound. To prevent interference between the drive units and minimize the effect of vibration, separate network boards for the woofer and tweeter are optimally arranged inside the cabinet. Ultra Wide Range Reproduction The Technics Speaker System is capable of reproducing sound over the ultra-wide frequency range of up to 100 kHz to deliver the vast frequency spectrum offered by high-quality, high-resolution music sources. The result is a faithful reproduction of audio signals with all nuances intact. Emotive Acoustic Technology Point-Sound-Source Speaker SystemUltra Wide Range ReproductionPhase Precision Driver (Coaxial Flat 2-way Speaker Unit)High-quality Network CircuitHigh Rigidity Entasis Form Cabinet Technics Definitive Design White High Gloss FinishEntasis Form EnclosureMagnet Fixed Fabric Grille Type Coaxial 2-way 2 Speaker Bass Reflex Speaker Unit Woofer / Tweeter:Coaxial 16-cm/6-1/2 inch Flat type x1 / 1.9-cm/3/4 inch Dome type x1 Crossover Frequency 2.5 kHz frequency Range 40 Hz - 100 kHz (-16 dB), 45 Hz - 80 kHz (-10 dB) Sound Pressure Level 85 dB / 2.83 V (m) Impedance 4 Ω Input Power (IEC) 50 W (Rated), 100 W (Max) Dimensions (W x H x D) 220 x 336 x 286 mm (including net and terminals)8-11/16 x 13-7/32 x 11-1/4 inch (including net and terminals) Weight Approx. 8.5 kg (/pc)Approx.18.7 lbs.(/pc) Accessories Speaker Cable (1.2 m/47-1/4 inch) x 2 *1, Owner's Manual *1 Length of the speaker cable may not be sufficient for your placement. Please prepare suitable cables based on your installation requirements.
