Technics SUGX70 Network Audio Amplifier
Technics SU-GX70 Network Audio Amplifier at Vinyl Sound Toronto Canada The Technics SU-GX70 is a Network Audio Amplifier from Technics (Osaka, Japan), available at Vinyl Sound in T oronto, Canada. Delivering 40 watts per channel into 8 ohms and 80 watts per channel into 4 ohms, the SU-GX70 is the most comprehensively connected amplifier in the Technics Grand Class lineup, combining a full digital amplifier with JENO Engine, Load Adaptive Phase Calibration, Chromecast built-in, Apple AirPlay 2, Bluetooth, FM tuner, HDMI ARC, a built-in MM phono stage, Space Tune room correction, and a Pure Amplification Mode that silences all network and HDMI circuitry for the cleanest possible music playback. For listeners who want a single component to serve as the hub for vinyl, streaming, TV audio, and network music in one room, the SU-GX70 is the definitive solution. JENO Engine and Full Digital Amplification The SU-GX70's power amplifier section uses full digital amplification throughout, processing signals digitally from input to output for greater immunity to external noise and more precise signal transmission than conventional analogue amplifier topologies. The JENO Engine — Jitter Elimination and Noise-shaping Optimisation — is applied not only to the main signal path but also to the HDMI ARC input, making the SU-GX70 the first Technics product to extend JENO processing to HDMI audio. Chip film capacitors replace conventional electrolytic types in power supply noise-reduction and signal path coupling positions throughout, further lowering the noise floor. The analogue input stage uses a discrete amplifier circuit redesigned from the SU-R1000's circuit with the same symmetrical layout and the same grade of low-noise FETs, thin-film resistors, film capacitors, and electrolytic capacitors used in the Reference Class model. HDMI ARC with Low-Impact Video Output The SU-GX70 is the first Technics amplifier to include HDMI ARC, allowing TV audio to be routed directly to the amplifier over a single HDMI cable for high-quality stereo playback of streaming services, broadcast audio, and any other TV source. Because HDMI ARC requires a video output from the receiving device, Technics has implemented a low-impact video output mode that outputs video signals at minimum rate with all pixel colour values set to zero, preventing any video-related noise from affecting audio performance. The TV audio signal is then routed to the JENO Engine via the shortest possible path to minimise jitter in the HDMI S/PDIF transmission — a capability unique to Panasonic and Technics as HDMI licensors. Load Adaptive Phase Calibration and Space Tune LAPC measures the frequency amplitude and phase characteristics of the SU-GX70 with the connected speakers in place and applies a speaker impedance adaptive optimisation algorithm to achieve an ideal impulse response. Both amplitude and phase characteristics are corrected simultaneously — something no conventional negative-feedback amplifier can achieve — resulting in richer spatial expression and more precise imaging. Space Tune provides an additional layer of acoustic optimisation, offering four presets — Free, Wall, Corner, and In a Shelf — selectable from the front panel or the Technics Audio Centre app, plus an L/R Custom mode for asymmetric speaker placements. Together, LAPC and Space Tune allow the SU-GX70 to adapt its output to the specific listening environment rather than assuming ideal acoustic conditions. Key Features 40 Wpc (8 Ω) / 80 Wpc (4 Ω): Full digital amplification with JENO Engine; 4 to 16-ohm load compatibility JENO Engine on All Inputs Including HDMI ARC: Jitter elimination and noise-shaping applied throughout the signal chain including TV audio via HDMI Load Adaptive Phase Calibration (LAPC): Measures and corrects both amplitude and phase characteristics of the connected speakers for ideal impulse response HDMI ARC: First Technics amplifier with HDMI ARC; low-impact zero-pixel video output prevents noise contamination; JENO processing applied to TV audio signal Twin Power Supply System: Dedicated independent power supply for the power amplifier circuits; same electrolytic capacitors as high-end models; non-magnetic brass speaker binding screws; high-speed 130 kHz switching supply Pure Amplification Mode: Shuts off power to network and HDMI circuits entirely; eliminates all digital noise from wireless and HDMI sources for the cleanest possible music playback Chromecast Built-In: Native Chromecast audio streaming from any Chromecast-compatible app Apple AirPlay 2: Wireless audio from any Apple device or AirPlay-compatible app Bluetooth (AAC and SBC): Wireless connection to smartphones, tablets, and computers FM Tuner: Built-in FM radio with included indoor antenna Network Streaming (LAN / DMR): WAV, FLAC, DSD, AIFF, ALAC, AAC, MP3 via wired LAN up to DSD 11.2 MHz and PCM 384 kHz USB-A Local Playback: DSD up to 11.2 MHz, PCM up to 384 kHz, FLAC, ALAC, AIFF, AAC, MP3 from flash drives USB-B Asynchronous PC Audio: USB Audio Class 2.0; PCM up to 384 kHz; DSD via ASIO Native and DoP modes; MQA decoding MQA Decoding: Full MQA unfolding across compatible digital inputs Built-In MM Phono Stage: Connect any MM-equipped turntable directly; 2.0 mV / 47 kΩ input sensitivity Space Tune Room Correction: Four installation presets plus L/R Custom mode; controllable via Technics Audio Centre app Discrete Analogue Input Stage (SU-R1000 Derived): Symmetrical layout with Reference Class grade passive components throughout PRE OUT: Connects to a separate power amplifier for system expansion 6.3mm Headphone Output Connections at a Glance Analogue Inputs: 2 x LINE RCA, 1 x PHONO MM RCA Digital Inputs: 2 x Optical, 1 x Coaxial, 1 x USB-A (local storage), 1 x USB-B (PC) Network: LAN (100BASE-TX / 10BASE-T), Wi-Fi, Chromecast, AirPlay 2, Bluetooth Video / TV: HDMI ARC (in and out) Outputs: 1 x PRE OUT RCA, 1 x Headphone 6.3mm Technical Specifications Output Power (8 Ω) 40 W + 40 W @ 1 kHz, THD 1.0%, 20 kHz LPF Output Power (4 Ω) 80 W + 80 W @ 1 kHz, THD 1.0%, 20 kHz LPF FTC Output Power (4 Ω) 60 W + 60 W @ 1 kHz, THD 1.0%, 20 kHz LPF Load Impedance 4 Ω to 16 Ω Phono Input MM; 2.0 mV / 47 kΩ; RIAA deviation ±1 dB Line Input 200 mV / 23 kΩ Frequency Response — Digital 20 Hz to 80 kHz (-3 dB, 4 Ω) Frequency Response — Line 20 Hz to 40 kHz (-3 dB, 4 Ω) Analogue Inputs 2 x LINE RCA, 1 x PHONO MM RCA Digital Inputs 2 x Optical, 1 x Coaxial, 1 x USB-A, 1 x USB-B HDMI ARC (in and out) Network LAN 100BASE-TX / 10BASE-T; Wi-Fi; Chromecast; AirPlay 2; Bluetooth (AAC, SBC) FM Tuner Yes (indoor antenna included) USB-A Formats DSD up to 11.2 MHz; PCM up to 384 kHz / 32-bit; FLAC, ALAC, AIFF, AAC, MP3 USB-B Formats PCM up to 384 kHz / 32-bit; DSD via ASIO Native and DoP; MQA Network Formats DSD up to 11.2 MHz; PCM up to 384 kHz; WAV, FLAC, ALAC, AIFF, AAC, MP3 Analogue Output 1 x PRE OUT RCA Headphone Output 6.3mm stereo jack Power Supply AC 120V, 60 Hz Power Consumption 63 W Dimensions (W x H x D) 16-15/16" x 3-55/64" x 14-31/64" Weight Approx. 14.6 lbs / 6.6 kg Included Accessories AC cord, FM indoor antenna, Remote control, Batteries, Owner's manual Frequently Asked Questions What is the Technics SU-GX70? The Technics SU-GX70 is a Network Audio Amplifier delivering 40 watts per channel into 8 ohms with the JENO Engine, Load Adaptive Phase Calibration, HDMI ARC, Chromecast built-in, Apple AirPlay 2, Bluetooth, FM tuner, MM phono input, USB local playback, network streaming up to DSD 11.2 MHz, Space Tune room correction, and Pure Amplification Mode. It is Technics' most connected integrated amplifier for living room use. What is Pure Amplification Mode on the SU-GX70? Pure Amplification Mode shuts off the power supply to the network circuitry and HDMI circuits entirely, eliminating all electrical noise generated by Wi-Fi, Bluetooth, Chromecast, and HDMI transmitters from the audio signal path. It is intended for critical music listening sessions where the cleanest possible amplifier performance is desired, and is easily toggled from the front panel or remote. How does the HDMI ARC work on the SU-GX70? A single HDMI cable connects the SU-GX70 to a compatible TV. The TV sends its audio output back to the SU-GX70 via the ARC channel, allowing the amplifier to handle all TV audio including streaming services, broadcast sound, and any HDMI-connected source. Technics' low-impact video output mode and JENO Engine processing minimise noise and jitter in the HDMI audio transmission. Does the Technics SU-GX70 support Roon? The SU-GX70 supports DLNA / DMR network streaming and can receive audio from Roon via DLNA. It is not listed as Roon Ready certified, meaning it will not appear as a native Roon endpoint, but it can still be used with Roon through a DLNA bridge. Contact Vinyl Sound Toronto for advice on network streaming setup with the SU-GX70. Does the SU-GX70 have a phono input for a turntable? Yes. The SU-GX70 includes a built-in MM phono input with 2.0 mV sensitivity and 47 kΩ input impedance, allowing any moving magnet turntable to be connected directly without a separate phono preamplifier. MC cartridge users will need an external step-up transformer or MC phono preamplifier connected to one of the LINE inputs. What is Space Tune on the SU-GX70? Space Tune is a room and placement correction feature that adjusts the SU-GX70's frequency response to compensate for acoustic effects caused by the speaker's installation position. Four presets — Free, Wall, Corner, and In a Shelf — are selectable from the front panel or the Technics Audio Centre app, with an L/R Custom mode for speakers in different positions. It is separate from LAPC and addresses room acoustics rather than speaker impedance characteristics. Where can I buy the Technics SU-GX70 in Toronto or Canada? The Technics SU-GX70 is available at Vinyl Sound in Toronto, Canada, an authorised Technics dealer. Contact us to arrange an audition or to discuss pairing the SU-GX70 with speakers and a turntable suited to your room and listening preferences.
