One material system, from RIP to squeegee. Key attributes: Print platform: runs on solvent, eco-solvent, UV and latex printers without profile gymnastics Film construction: 70 micron polymeric PVC that holds registration through printing, lamination and install Matched overlaminates: gloss, matte and super matte on the same 70 micron base, so the finished stack behaves predictably Air-release adhesive: pressure-sensitive, repositionable during placement, no trapped bubbles across large panels Outdoor durability: three years vertical outdoor life on printed and laminated graphics Roll format: 1.52 m wide, 39 m of print film against 40 m of laminate, so the laminate never runs short before the print does A print shop loses money in the gaps between steps, not during the steps themselves. Ink that outgasses too slowly, a laminate that tunnels at the roller, film that moves between the cut table and the van. TeckWrap Digital Print Media closes those gaps by running the whole job on one material system: a stable 70 micron polymeric base, a matched overlaminate at the same thickness, and one adhesive behavior across the stack. The base film prints white and semi-matte. Final appearance is a laminate decision, not a print decision, so the same artwork ships gloss for a retail fleet, matte for a corporate fleet, or super matte for a show build without requoting the print. Gloss lifts saturation and hides minor banding. Matte kills reflection on flat panels and photographs cleanly. Super matte reads closest to a factory matte finish and is the tightest of the three to install. Three years of vertical outdoor durability applies to the printed and laminated graphic, not to bare print. Unlaminated output carries no outdoor rating on this material. Service range runs -40°C to 80°C, which covers northern winter fleet work and a summer roof panel on a parked trailer. Rolls run 1.52 m wide, enough to cover most van and box truck sides in a single seamless panel.
