Tekcem 025 Industrial Plus is a fast-setting, single-part, heavy duty self-levelling screed designed for application in commercial and light to medium duty industrial environments where a smooth, level and highly durable wearing surface is required. Applied at thicknesses from 3mm to 25mm in a single pour and requiring only the addition of water, it produces a hard-wearing finish that can be used without any further floor covering, or overlaid with industrial coatings for a higher specification finish. With light foot traffic possible after just 3 hours, light forklift and wheeled traffic after 24 hours, and full traffic after 7 days, it is well suited to warehouses, workshops and other demanding commercial environments where getting an area back into use quickly is essential. Shrinkage compensated, moisture tolerant and available with a lighter screed appearance, it can also be laid below a damp proof membrane. Benefits Applied from 3mm to 25mm in a single pour — versatile for both levelling and heavier build-up in one application Suitable as a hard-wearing surface without the need for a floor covering, or can be overlaid with industrial coatings Light foot traffic after 3 hours; light forklift and wheeled traffic after 24 hours; full traffic after 7 days Single part formulation — just add water, no additives required Shrinkage compensated for a stable, long-lasting finish Pumpable for fast, efficient installation across large floor areas Moisture tolerant — can be laid below a DPM Protein free — will not harbour bacteria, yeast or mould High durability suitable for heavy-duty commercial and light-medium industrial use Good to know Ideal for warehouses, workshops and other commercial or light-medium industrial environments requiring a durable wearing surface Lighter screed appearance compared to standard industrial formulations Suitable over sand/cement screeds, concrete, sound asphalt, calcium sulphate screeds, ceramic, quarry and natural stone tiles, underfloor heating, plywood and timber boards Multiple model specifications available including combinations with Tekgrip, Tekprime, SF Membrane and seal coat options — refer to Tekcem's specification documents for your specific substrate Always refer to the Tekcem 025 Industrial Plus product sheet and MSDS before specifying or applying
