The TermDriver 2 is a USB-to-serial interface with a built-in screen for real-time monitoring and debugging serial connections. If you've ever struggled to debug hardware, asked yourself why your RaspberryPI isn't booting, lost hours fighting with microcontrollers only to realise that the serial connection was incorrectly setup - or wished you could "just see what was going on" across a serial connection, the TermDriver was built for you. The TermDriver is the only USB-UART device you need. As an adaptor, it handles baud-rates from 110bps - 2Mbps, can drive almost any device, sensor or peripheral with up to 350mA with cleaned voltage. As a serial-debugger, the screen provides auto baud-rate detection, real-time monitoring and control-line status. Its terminal emulation is perfect, with full ANSI support, colours, layouts and cursor positioning are faithfully replicated. Built on a dual-core RP2040 framework and using authentic FTDI chips - the TermDriver is precision engineered, standards compliant and built to last a lifetime. This architecture makes it a completely standalone device: no external computer is necessary to drive it: it's a fully-featured serial monitor for debugging embedded devices, serial traffic or headless systems. Whether you're working with electronics, microcontrollers, embedded systems or linux devices - the TermDriver is a must-have product. 1 2 3 4 5 1. FULLY STANDALONE USB-SERIAL ADAPTOR Replaces your existing USB-UART adaptor,but also works standalone as a serial monitor. 2. Auto baud-rate + config detection Automatically detects & supports 110bps - 2Mbs baud-rates. Auto-detects serial/parity/stop configurations. 3. Real-time control-line monitors Monitor RX,TX and control-line statuses in real-time. 4. High-DPI Terminal Emulation High-DPI IPS screen with perfect ANSI-compatible terminal emulation in your pocket. 5. Rapid connectivity Dupont compatible input sockets for rapid connectivity. See the TermDriver in action Detailed functionality Display & Interface: High-contrast all-angle IPS display, 230 pixels-per-inch Full ANSI terminal emulation with color support Real-time control signal monitoring (RTS, DTR) Rugged one-piece design, custom bezel Power & Connectivity: Up to 350 mA @ 3.3V power output Micro-USB host connection Standard 0.1" header pins Standalone operation: no external PC required Key Specifications: Baud Rates: 110 to 2,000,000 bps Control signals (RTS/DTR) Dual-core RP2040 microcontroller (ARM Cortex-M0+) 32 KB hardware input buffer Zero-lossarchitecture Software & Compatibility: Driver-free operation on Windows, macOS, Linux Standard USB CDC ACM device class Open source firmware (BSD 3-clause license) Open source hardware Runs standard CircuitPython What's included 1x TermDriver 2 (CE Certified) 1x Rugged Screen Bezel TermDriver 2 Resources: User Guide (PDF) TermDriver 2 Github: Firmware + Hardware Source Technical Support available at [email protected]
