2017-2023 Tesla Model 3 Premium Auto Styling brings another way to protect your Model 3 , our headlight Protection Film Pre Cuts. Premium Auto Styling vinyl overlays are computer precision cut into durable automotive grade vinyl. This Protection Film overlay looks OEM when properly installed. Unlike most eBay or Amazon vendors, Premium Auto Styling vinyl overlays are designed and produced here in the USA in our own facility. We design and test fit all products to ensure a perfect fitment guaranteeing you the best results . Basically, if they don’t work on our cars, they’re not going to end up on yours. This Pre-cut will need minimal trimming once the Protection Film is tacked/dry. This occurs because you will need to stretch the film to remove any wrinkles and tension that will develop while installing this Protection Overlay. >> SET INCLUDES : Driver And Passenger Side Install guide WET INSTALLATION: Getting the vinyl installed on your vehicle is very easy and only requires minimal tools. Tools Needed: Pro Felt or Hard Squeegee (you can use a room key card or credit card in a pinch) Premium Surface Lube (you can make your own by filling a spray bottle with 16 oz of water and 1 drop of dish soap... This will be your "Slip Solution" Premium Surface Prep (This will be your "Tack Solution") use sparingly Blade (only necessary for overlays that have extra material that needs to be trimmed) Heat Gun (not necessary for difficulty levels 1 or 2, but recommended for all installations) For Best results we recommend cleaning the surface that you'll be applying our overlays. Cleaning consists of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE). Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 80 degrees (F). Vinyl can be installed as low as 50 degrees (F), and up to 90 degrees (F). To begin, you first want to spray the adhesive side of the vinyl very lightly with surface lube and then position the vinyl into place on your vehicle. Use a squeegee and start from the center and begin pushing the air from beneath the overlay toward the edges - you may need a heat gun to help conform the material to aggressive bends and or corners. Quality Film • Adhesive backed film for easy installation and removal. • Maintenance free & car wash safe. • Can be removed without any damage to surface. • 3-8 year life expectancy. This install is a 4 out 5 in Difficulty. Difficulty Rating of 4 is used when you definitely need time and patience to install this product. It would be very helpful to have experience installing vinyl or tint. but it is absolutely doable. (APPRENTICE INSTALLER STATUS) >> DISCLAIMER INFORMATION MORE >> Difficulty Rating Information
Related
Related
Related
Related