Transform your empty trailer hitch receiver into something functional! Introducing the HitchPod. A universal rear light pod housing that will fit any 2" trailer receiver. Designed to hold a Baja Designs S1(sold separately). Configuration is up to the end user, but some examples are a brighter reverse light, Amber chase light, or even an auxiliary work light. Injection molded out of high strength ABS and made in USA. What’s in the box MESO Customs HitchPod: The main housing designed to mount securely inside your trailer hitch receiver. What’s not included Baja Designs S1: Light must be purchased separately. Hitch Pin: Strongly recommended to use a locking hitch pin, but no specific model can be recommended at this time. Drill Bit: Size depends on the hitch pin diameter. Most hitch pins are 5/8", but verify yours first. Installation Insert the HitchPod: Slide the HitchPod (with the light removed) into your trailer hitch receiver. Mark Pin Locations: Use a sharpie to mark the side pin holes. The HitchPods are not pre-drilled because hitch pin depths vary between vehicles — drilling after test-fit ensures a perfect flush mount. Drill Both Sides: Use the correct drill bit size to match your hitch pin diameter. Recommended: A step drill bit for cleaner hole sizing. Install the Baja S1 Light: Mount your light using the provided Allen screws. Wire the Light: Wiring is left to the customer so you can choose your preferred function (e.g., brake, reverse, chase, etc.).
