View/Print Instructions Blade – 45° with low pressure Temperature 330° F Time 15 Seconds Peel Peel hot or cold. Light blue COLD ONLY Pressure Medium/firm even pressure Cut/Print Cut mirror image Materials Cotton, linen, wool, lycra, spandex, polyester blends. NO nylon, NO mesh Care Wash warm, tumble dry on normal setting Additional Instructions Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials: Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment. We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment. Cut Settings for Graphtec CE6000: Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended. 1. Offset: 0 2. Speed: 25 cm/s 3. Acceleration: 4 4. Cut Force: 16 *HTW uses a 45 Degree Blade Cut Settings for Silhouette Cameo: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Material: Heat Transfer, Smooth Blade: 3 Speed: 8 Force: 6 Cut Settings for Cricut®: Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended. Set Material: Iron-On Pressure: Default Blade: Fine-Point Blade (Standard)
