Increase the duration of the Parking Surveillance mode of your Thinkware Dash Cam with the iVolt PRO External Battery. With its 8.5 A high-speed charging, the external battery is capable of operating a dash cam for up to 25 hours on approximately 50-minute charge. Max recording time will vary by the Thinkware Dash Cam in use. Supports parallel installation of two external batteries to expand battery capacity. Compatible with all Thinkware Dash Cam models. Do I need to use a Dash Cam Battery Pack? Thinkware Dash Cams offer a few different methods in which the device is powered. All Thinkware Dash Cams come standard with a built-in voltmeter and battery protection settings to ensure you will not return to your vehicle with a dead battery. These Voltage Settings can be utilized with the Hardwiring Kit or OBD-II Harness to protect your battery when using Parking Mode. However, If you wish to record an extended amount of Parking Footage, or if you have a Luxury Vehicle/Small Vehicle Battery the Thinkware iVolt PRO Battery Pack may be the right choice for you. The Benefits of using a Dash Cam Battery Pack Extended Parking Mode When Hardwired the Dash Cam will record in Parking Mode for up to approximately 8 hours (depending on vehicle’s battery and the voltage cut-off setting) before powering down to save power. With the iVolt PRO, your 1 Channel Dash Cam can run for up to 30 hours, or if you have a 2 Channel Dash Cam, up to 25 hours in Parking Mode before needing to recharge the battery pack. Safe for Luxury Vehicles If you own a Luxury Vehicle such as a BMW, battery drainage not only means replacing the vehicle’s battery but it can also require the dealership to reset the vehicle’s electronics, which can turn into an extremely expensive fix. By using a Dash Cam Battery Pack, you will still be able to use our Advanced Parking Mode risk-free. Avoid Wear and Tear With a Hardwired Dash Cam, the constant discharge on the battery over a long period of time can cause wear and tear. The iVolt PRO Battery Pack only draws power to charge when you are driving the vehicle, which prevents damage to the vehicle’s battery over time. With the ignition off, the Dash Cam relies solely on the Battery Pack for power, eliminating the need to draw power from the vehicle’s battery completely. Why use a Dash Cam Battery Pack instead of a Portable USB Battery Pack? Portable USB Battery Packs feature different technology than a dedicated Dash Cam Battery Pack. Portable USB Battery Packs typically use Lithium-Ion batteries to provide power to the device. Our Thinkware iVolt PRO utilizes a LiFePo4 (Lithium iron phosphate) battery. The LiFePo4 battery is safer for in-vehicle use as it was designed to withhold extreme temperatures. Lithium-Ion Batteries used in these Portable USB Battery Packs have been known to combust under extreme heat. In addition, Portable USB Batteries typically have a long charging time (overnight) compared to our Thinkware iVolt PRO which fully recharges in 45 mins while driving. Specifications Output voltage/current:11.0 V – 14.2 V/2 A MAX Charging voltage/current:LOW (normal-speed charge mode): 14.2 V/4.5 A MaxHIGH (high-speed charge mode): 14.2 V/8.5 A Max Charging time:LOW (normal-speed charge mode): Approximately 90 minutesHIGH (high-speed charge mode): Approximately 50 minutes Use time:Approximately 27 hours (based on a dash cam’s 3.5 Wh power consumption rate) Cells:Lithium iron phosphate (LiFePo4) Product capacity:12.8 V/7,500 mAh/96 Wh Dimensions/weight:155 (W) X 216 (L) X 34 (T) mm/Approximately 1.5kg Operating temperature:Charging: 0 – 45 °CDischarging: -10 – 60 °C
Related
Related
Related
Related