This gray 3 Legged Thing Tripod Kit includes a gray Winston 2.0 Tripod and gray AirHed Pro Ball Head. Together, the tripod and ball head form a support system that features three detachable legs and a removable center column. With the ball head, each leg can be configured as a monopod with up to a 60.3" height or can be combined with the center column to form a monopod with up to 79.0" in height. Tripod heads such as the AirHed Pro Ball Head that are compatible with a 3/8"-16 mount can be connected to the top of the Winston 2.0 Tripod. When combined and configured as a tripod, the Winston 2.0 Tripod and AirHed Pro Ball Head supports up to 88.0 lb and measures 24.0" when folded. Each of the tripod's 3-section legs features an independent spread, a 3-position angle lock, and twist locks for rapid deployment. The Winston 2.0 Tripod and AirHed Pro Ball Head can be set at a minimum height of 9.1" when the tripod's push-and-pull, rapid center column is removed. Together, the three legs can be extended to obtain a maximum height of 59.0" or 76.4" with the center column fully raised along with the ball head. Each of the carbon fiber legs includes a removable rubber foot, which can be substituted with separately available spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil. For added versatility, the Winston 2.0 Tripod's three removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a tabletop tripod. A carry bag with strap is provided for storage and transport. The AirHed Pro Ball Head is an Arca-type ball head with a load capacity of 88.0 lb and can be attached to tripods or other support systems that feature a 3/8"-16 mount. Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the included QR-OCTA Quick Release Plate. The quick release plate can be attached or removed from the integrated clamp located at the top of the head's ball-and-socket joint by tightening or loosening the clamp's knurled, locking knob. Dual retaining screws are included for use along the underside of the plate. These screws prevent the plate from accidentally sliding off the ball head when the clamp is opened. The quick release plate features a rubberized, non-slip platform while a built-in bubble level along the edge of the clamp opposite the clamp's locking knob accommodates landscape orientations. By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Under the primary locking knob is a secondary locking knob, which controls the ability to rotate the head 360°. Tripod and Ball Head Arca-type ball head and carbon-fiber tripod with 3/8"-16 mount Tripod features three detachable legs and removable center column With ball head, each leg can be configured as a monopod with up to a 60.3" height or can be combined with the center column to form a monopod with up to 79.0" height Tripod configuration with ball head, supports up to 88.0 lb Push-and-pull center column with for rapid camera, lens, or sport optic positioning Center column D-ring to accommodate ballast for additional stability Can be set for a minimum height of 26.0" or 9.1" without the center column With ball head, all three legs can be extended in the tripod configuration to obtain a maximum height of 59.0" or 76.4" with the center column fully raised Center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them Legs each feature 3 sections with twist locks for rapid deployment and can be independently spread Legs can be locked at 23, 55, or 80° angles Rubber feet help to enhance stability on a wide variety of surfaces Weighs 4.5 lb and measures 24.0" when all three legs are reversed 180° and folded Rubber feet can be removed and substituted with separately available 3 Legged Thing spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil Removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a table-top tripod 3 Legged Thing Toolz multi-tool to adjust miscellaneous component screws Ball head microfiber bag Tripod kit carry bag with strap for storage and transport AirHed Pro Ball Head Arca-type ball head with 88 lb load capacity Compatible with tripods or support systems that feature a 3/8"-16 mount Uses ball-and-socket joint to help maximize pan-and-tilt flexibility Ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place Large primary locking knob with knurled surface allows ball-and-socket joint to be quickly swiveled, angled, fully tilted, or returned to its upright position Secondary locking knob with knurled surface allows head to rotate 360° Integrated clamp on top of on the ball-and-socket joint is compatible with included QR-OCTA Quick Release Plate Knurled locking knob for integrated clamp secures compatible Arca-type quick release plates Built-in bubble level along the edge of the clamp opposite the clamp's locking knob accommodates landscape orientations Durable magnesium alloy construction QR-OCTA Quick Release Plate Compatible with Arca-type quick release clamps 1/4"-20 mount Dual retaining screws along the underside of the plate prevent the plate from accidentally sliding off the AirHed Pro Ball Head Durable, aluminum alloy construction
