TIG200P AC/DC ProSaver Bundle Bundle Summary In addition to the welder’s standard accessories, this kit includes a TIG foot pedal, a 71-piece torch parts kit, blue tungsten electrodes, and welding gloves, adding current control, service parts, spare electrodes, and basic hand coverage for varied shop work. Bundle Highlights 01 Broader TIG Work Support Foot control, spare tungsten, and compatible torch parts support a range of AC/DC TIG shop projects. 02 Control Current by Foot Adjust TIG amperage while keeping both hands positioned for torch and filler-rod control. 03 Fewer Consumable Interruptions The 71-piece kit keeps compatible torch wear parts available for routine service and setup changes. 04 Basic Hand Coverage Added Included welding gloves add a basic layer of hand coverage for suitable shop welding tasks. Extra Accessories Included in This Kit Everything below is included in addition to the standard accessories supplied with the welder. TIG Amperage-Control Foot Pedal ×1 Foot-Controlled Amperage Hands-Free Heat Control. Adjust current by foot while keeping both hands positioned for steady torch and filler-rod control. Compatibility: Designed for the ARCCAPTAIN TIG200P AC/DC foot-pedal connection. 71-Piece TIG Torch Parts Kit ×1 Torch Consumables Replacement Parts Within Reach. Keep compatible TIG torch wear parts available to reduce interruptions during maintenance and setup changes. Compatibility: Compatible with the included WP-26 torch; select each part to match the tungsten and cup configuration. Blue Tungsten Electrodes Spare TIG Electrodes Additional Electrodes on Hand. Provides spare blue-coded tungsten electrodes for compatible AC and DC TIG work and replacement of worn or contaminated electrodes. Use Condition: Match the tungsten type and diameter to the process, material, amperage, torch setup, and product manual before use. Welding Gloves Basic Hand Coverage Added Hand Coverage. Adds a basic protective layer for suitable welding tasks while supporting routine material and torch handling. Safety Note: Inspect the gloves before use and confirm they are suitable for the process, heat level, and task; other PPE remains required. Best-Fit Applications Mixed aluminum, mild-steel, stainless-steel, and copper TIG work using the correct process, tungsten, and filler metal. Repeated TIG shop work that benefits from spare tungsten and compatible torch service parts. Fabrication where foot-pedal current control helps respond to changing joint geometry or heat buildup. Maintenance and repair work where bundled hand coverage, pedal control, and torch-support parts add convenience. Occasional Stick repairs using separately purchased compatible electrodes; the foot pedal is not used in Stick mode. How to Use the Kit 1 Match the welding process, tungsten, and separately purchased filler metal to the base material and joint requirements. 2 Connect the welder, WP-26 torch, work clamp, specified gas equipment, and a filled 100% argon cylinder according to the product manual. 3 Disconnect input power before attaching the foot pedal. Connect it as directed in the manual, restore power, then select AC TIG or DC TIG for the applicable material. 4 Prepare the selected tungsten correctly, set gas flow and welding parameters, and test the settings on matching scrap material. 5 Use the pedal for TIG current control and install parts from the 71-piece kit only when they match the torch setup. 6 Wear the included gloves with a properly rated welding helmet, protective clothing, and all other task-appropriate PPE. Additional Equipment Still Required A filled 100% argon cylinder, compatible input circuit and outlet, correctly matched TIG filler metal, a properly rated welding helmet, protective clothing, and other task-appropriate PPE are still required. Compatible Stick electrodes are required for Stick welding.
Related
Related
Related
Related