Most Tikka T3x (and T3 / T1x) stocks ship with a comb height that works fine with iron sights — but mount a scope and you're craning your neck to find the reticle. That costs you time, consistency, and comfort on long sessions. The Nokka Drop-Comb Cheek Riser fixes this. It's a purpose-built Tikka cheek riser — also called a cheek piece or cheek rest — that raises your cheek weld for scoped Tikka factory stocks, especially medium- and high-height mounts with larger objective lenses. Mount it with double-sided tape or removable glue, dial in your preferred height, and you get a solid, repeatable cheek position every time you shoulder the rifle — with no drilling and no permanent modification. How much does it raise your comb? The riser lifts the comb 18–24 mm, and that range is adjustable — you set it, not us. That's the whole point: one adjustable cheek riser replaces the usual Low / Medium / High fixed pieces. Instead of guessing which fixed height to buy — and discovering it's 3 mm too low once the scope is mounted — you dial the cheek rest to your exact optic and lock it in. One part, your preferred height, no re-ordering. Do I actually need a riser? Quick gut-check based on how your rifle is set up: Probably fine as-is: low rings with a compact 42–44 mm objective — the OEM comb often gets you close enough. You'll want rise: medium or high rings, a 20 MOA rail, or a 50–56 mm objective. Bigger glass and taller mounts push the scope's centre-line up and away from the factory comb, so your cheek floats and your eye hunts for the reticle. This cheek piece is optimised for exactly that second group — medium/high mounts and 50–56 mm objectives — bringing your cheek position closer to the optic so the sight picture is easier to find when you shoulder the rifle. No drilling. Removable mount. No permanent modification. Plenty of adjustable cheek risers make you drill your stock or bond a rail to it — a permanent change that tanks resale value and can't be undone. Nokka's cheek rest mounts to the OEM stock with double-sided tape or removable glue. No holes, no permanent modification. Fit it in about 5 minutes, adjust it whenever your setup changes, and remove it later if you change your setup. Why a drop-comb design? A drop-comb shape adds cheek height while keeping the contact surface comfortable behind the scope. It is a fit and cheek-weld aid for shooters who have mounted taller optics on Tikka factory stocks and want a more repeatable head position. What's in the box Drop-comb profile with adjustable cheek-height support Adjustable height — dial in 18–24 mm of rise for your exact scope alignment Mounts to Tikka T3, T3x, and T1x OEM stocks with double-sided tape or removable glue (incl. T3x Lite) Specifications Comb rise: 18–24 mm, adjustable Compatibility: Tikka T3, T3x, T1x OEM stocks (incl. T3x Lite) Optimised for: medium/high mounts and 50–56 mm objectives Install: Double-sided tape or removable glue, ~5 min — no drilling, removable Weight: Minimal — you won't notice it in the field Made in Australia Bolt clearance: the cheek rest mounts far enough back that you can still remove the bolt for cleaning without taking the riser off. Pair with the LOP Spacer Kit for a complete ergonomic setup, or save with the Tikka Performance Kit bundle. New to dialling in a Tikka? Our Tikka T3x setup & fit guide walks through cheek weld, length of pull and trigger in the right order. Common questions How much does it raise my comb? It raises the comb 18–24 mm, and that range is adjustable — dial it to your exact scope height rather than buying a fixed Low/Medium/High piece and hoping it lands right. Will this fit my Tikka T3, T3x or T1x? Yes — designed for the OEM stocks on all three platforms (including the T3x Lite, which shares the sporter stock geometry). It mounts with double-sided tape or removable glue — no drilling and no permanent modification. Is this a Tikka T3x cheek riser, a cheek piece or a cheek rest? All three names describe the same part. This is a drop-comb Tikka cheek riser (also called a cheek piece or cheek rest), made for the Tikka T3, T3x and T1x OEM stocks. How does it attach to my stock? You position it on the comb of the OEM stock, set it to your ideal cheek-weld height, then mount it with double-sided tape or removable glue — no drilling, and it's removable if you want to change or remove it. What scope mounts and objective sizes does it work with? Optimised for medium/high mounts with 50–56 mm objective lenses. Low rings with a compact 42–44 mm objective are often fine on the factory comb; medium/high rings, a 20 MOA rail, or big glass are exactly where you'll want the rise. Can I still remove the bolt with it fitted? Yes — it mounts far enough back to clear the bolt, so you can strip and clean without removing the cheek rest. Do you ship internationally?Yes. Available shipping options and any duties/taxes are shown in cart/checkout before payment. See our shipping policy for details.
Related
Related
Related
Related