With the EDIC Endeavor, you not only get a tile cleaning machine, but you also get a carpet cleaning extractor. This unit has an adjustable pump that can operate from 70 to 1200 PSI. It is the first do-it-all extractor that can truly do-it-all! The pump will dial all the way down to 70 PSI for that delicate upholstery cleaning. The extractor vacuum & solution hose, as well as the upholstery tools are sold separately. We recommend using a 500 PSI dual jet carpet cleaning wand for any carpet cleaning, because it can cover the gamut for carpet cleaning. Vacuum cuffs are 1½ inch in diameter, which allows you to personalize the machine to your needs. The higher end settings of the pump are used primarily for tile and grout cleaning. The stand up high pressure tile cleaning tool can be used to clean tiled surfaces. If the pump becomes air locked, simply turn the knob (check the diagram) on the back of the unit to allow the vacuum motors to suck water through the pump, essentially self-priming it. When using the spinner tool, you can put down a ton of solution to thoroughly clean grout lines, and other hard to clean stains from hard surfaces. The vacuum motors are mounted to run in parallel. This means that they are mounted next to each, not in series, where one vacuum pulls air through the other vac motor. Mounting them in parallel creates more airflow, which is crucial on hard surfaces where the suction from the motor can seal a tool onto the floor. When this happens, you restrict the natural airflow, so increasing the air flow helps in recovering water off of hard surfaces. EDIC really sat down and took their time when designing the Endeavor
Related
Related
Related
Related