Product Details: Compatibility: The Tippmann X7 Phenom Flatline barrel will fit the Tippmann X7 Phenom. This will NOT fit on the A-5 or the 98. Manufacturer's Warranty: 90 Days UPC: 669966997610 Benefits of the Tippmann Flatline Barrel: The curved barrel of the Flatline imparts a backspin on the ball. This backspin gives your shot a flatter trajectory much like a slider in baseball or a slice in tennis. This flatter trajectory gives you a longer effective range. A typical paintball marker shoots just over 100 feet. A marker with a Flatline at the same angle will give you an extra 100 feet of distance. This is a new look for the Flatline Barrel series and the shroud integrates perfectly in to the body of your X7 for a seamless look. This is a great add on accessory for the X7 Phenom. X7 Flatline Videos: Factory Promotional Video TippmannParts Unboxing and Video Review - See Below Factory Installation Video (X7) TippmannParts Installation Video (X7 Phenom) - See Below Factory Installation Video (X7 Phenom) TippmannParts Barrel Adapter Swap Video Factory Video: Change the Barrel Adapter This video is slightly older and states that the X7 adapter is installed and the Phenom adpater is included, but as of now (October 2014) the Phenom adapter is installed and the X7 adapter is included as an extra. During design it was noticed that the standard X7 adapter was getting too many ball breaks when used on the Phenom. For the new Phenom adapter, the barrel sits farther in (closer to the gun) the adapter. About 0.200". This way, when the gun is fired and air is released to propel the ball, the ball is actually sitting in the barrel rather than in the adapter. That slight change eliminated the ball breakge issues. If there is any confusion as to which adapter is which, you can tell by their index marks on the front. The X7 Phenom Flatline barrel adapter has a "Y" index mark which you use to align the adapter to the top center of the barrel. The X7 Flatline barrel adapter has a straight line index mark. Included Items / Parts / Components: Curved Flatline Barrel X7 Barrel Adapter X7 Phenom Barrel Adapter Squeegee - More Squeegee Options Wide Mouth Barrel Sleeve - Color may vary. Yellow - Red Installation / Instruction Manual Tech Notes and Installation: Two barrel adapters are included with the X7 Flatline. The adapter is the metal piece that connects the curved barrel to the gun. The arched barrel is not threaded. Instead, it slides in to the barrel adapter and is then held in place by a set screw. With the adapter attached, you can then install the barrel and adapter in to the gun with a quarter turn motion. The barrel comes with the Phenom adapter already installed. If you have a regular X7 (non-Phenom) then you'll need to swap the barrel adapters before installing. X7 Flatline Barrel Parts List Manufacturing: Flatline Barrels are manufactured by Tippmann. The metal components (the heart of the barrel) are manufactured in Ft. Wayne, IN. This includes the curved barrel and the barrel adapters. The plastic shroud is made in China.
