Hey, Bryce here! Washers are the part of a titanium build people forget until the whole bike is done and there are four dull steel washers staring back at them from an otherwise finished cockpit. Beyond the look, a proper washer spreads clamp load so a bolt head does not dig into soft aluminum brackets and plastics — which is exactly where most e-moto hardware lives.These are certified Titanium Grade 5 (6AL-4V) washers in M5, M6, M8, and M10, PVD anodized to match the rest of your titanium hardware. They work anywhere on a Surron, Talaria, E-Ride Pro, Altis, or any other e-moto running metric fasteners. Grab the sizes you need and finish the build properly.Compatible With: Surron Light Bee X and Ultra Bee Talaria Sting MX3 / MX4 / MX5 and Talaria XXX E-Ride Pro SS / SR, Altis Sigma, Rawrr Mantis Any e-moto using M5, M6, M8, or M10 metric hardware Features: M5: flat or lock — 5mm ID, 10mm OD, 1mm thick M6: flat — matched to standard M6 e-moto hardware M8: flat — 8mm ID, 16mm OD, 1.5mm thick M10: flat — 10.14mm ID, 21.8mm OD, 2.1mm thick Certified Titanium Grade 5 6AL-4V — anodized / PVD coated Corrosion-proof — will not rust-stain your anodizing or plastics See Also: Titanium Grips for E-Moto Pegs (24 pcs) | Titanium Stem / Handlebar Mount Bolts | Titanium HardwareShips fast from the USA, straight to your door. Frequently Asked Questions Which size do I need?Match the washer to the bolt diameter, not the head. An M6 bolt takes an M6 washer. If you are unsure, measure the bolt shank with calipers.Are lock washers available or only flat?M5 is offered in flat or lock. M6, M8, and M10 are flat. For vibration-prone joints, use a flat titanium washer with blue threadlocker rather than a split lock washer.Will titanium washers react with aluminum parts?Titanium is far less galvanically aggressive against aluminum than steel is, which is one of the reasons it is preferred on aluminum-heavy chassis. A dab of anti-seize is still good practice in wet climates.
