Public Address Amplifier • 3 channel • 2 zones • Front panel rotary pots for input level, master bass / treble, and master volume, plus front panel TRS input for channel 2. The Ashley TM-360 Public Address Mixer/Amplifier is a mono mixer/amplifier with 60 watts of power and intended for background music, paging, commercial offices, retail spaces and more. The amplifier supports 4 ohm, 25 volt, 70 volt and 100 volt operation, with taps on Euroblock connectors. There are mic and line inputs, phantom power, and front-mounted audio input jack. Priority mute interrupts background music and all other programming in order to prioritize pages, announcements, etc. The straightforward front panel features a level control, bass and treble controls and level control dial for each of the 3 input channels. 1 x mic/line input (balanced Euroblock) 2 x line/stereo inputs (balanced Euroblock, unbalanced stereo) Independent input gain Priority mute Signal presence LEDs Zone 2 Output for selected inputs Bass & treble controls Selectable 400Hz low-cut filter 60W Output 4 Ohms (direct out) 25V Transformer Isolated (US)70V Transformer Isolated 100V Transformer Isolated (EC, Japan) Manual or automatic power saving mode Ashly TM-360 specs Power Output 60W RMS (THD 1%) Zone 2 output: Rated power 8Ω (RMS, THD 3%), 1W, Balanced 600Ω, 2.4V Output Voltage EC & Associated (230V): 4Ω / 15.5V, 82Ω / 70V, 167Ω / 100V USA/Canada & Associated: 4Ω / 15.5V, 10.4Ω/ 25V, 82Ω / 70V Frequency Response Input 1, 2, 3: +1/-3dB, 80Hz - 15kHz(1W @ 1KHz) THD < 1% (60W @ 1kHz) Signal-to-Noise Ratio Input 1, 2, 3: >80dB (60W @ 1KHz, A- weighted) Input Sensitivity Input 1: -10dBV to -50dBV Input 1, 2: 0dBV to -20dBV Tone Control Treble (10kHz): +/- 10dB Bass (100Hz): +/- 10dB Residual Noise Master volume minimum: -72dB Master volume maximum: -57dB Preamp Output 0dBV (input -10dBV) Switches SW1: Zone 2 Assign Input 1 SW2: Zone 2 Assign Input 2SW3: Zone 2 Assign Input 3 SW4: VOX Trigger Input 1SW5: VOX Trigger Input 2 SW6: Mute Link Input 2 & 3SW8: Ch1 Phantom Power, +18V Mute Manual Mute Contact Closure: Pins 1 & G = Input 1 Mute Trigger Master System Standby Contact Closure: Pins G & 2 = Power Standby Power Supply 120VAC, 60Hz, 24W (USA & Canada and Associated) 230VAC, 50/60Hz, 24W (EC and Associated) Current Draw Standby: 0.15A Idle: 0.24A1/8 power pink noise: 0.38A 1/3 power sine wave: 0.66A Online Thermal Dissipation Standby: 26 Idle: 431/8 power pink noise: 53 1/3 power sine wave: 75 Temperature 4 to 49° C (40 - 120° F) Dimensions (WxHxD) 11.4 x 3 x 7.3" (290 x 76 x 185mm) Weight 8.6lb (3.9kg)
Related
Related
Related
Related