Grinding through jobs with a machine that runs out of heat halfway through the room? Bogging down on tile and grout because your unit can't hold pressure? A cold, underpowered portable turns a two-hour job into a four-hour one, and the results still look streaky when you're done. The TMF Dually Heated Portable fixes that. It runs 800 PSI with a 1500-watt inline heater and two 2-stage vacuum motors wired in parallel, so you get real extraction heat and real suction on carpet, tile, grout, and upholstery. One machine, every surface, no compromises. Dial pressure right at the machine with the pressure adjusting valve, meter chemical into the incoming water on the fly, and let the automatic pump-out empty the recovery tank for you so you're not stopping to dump every few minutes. The 2" vacuum port pulls maximum airflow, and it drops down to 1.5" with the included enlarger cuff if that's what your wand runs. What It Handles Carpet: Squeeze the trigger and work short forward and back strokes. Keep pressure under 500 PSI on carpet to protect the fibers, then bump it up for the tough stuff. Tile & Grout: Delivers high-pressure fresh water to the surface and extracts the emulsified soil. Pre-spray your grout cleaner, let it dwell, then rinse and pull with the machine. Upholstery: Same heat and suction, gentler pressure. Handles automotive and furniture work without soaking the padding. Built to Keep Running Stays hot: 1500-watt inline heater comes up to temp in about 5 minutes and holds it through the job. Serious suction: Two 2-stage vacuum motors in parallel, 200 CFM and 92" water lift. Automatic pump-out: Float-triggered discharge cycles the recovery tank empty so you keep cleaning. Chemical injection: Meters cleaning solution into the water automatically. Adjustable ratio from roughly 1:673 down to 1:145. Freeze protection built in: Blow the pump and hoses clear with air in seconds before cold-weather storage. Easy maintenance: Removable float shut-off screen and in-line filter, upright storage, simple daily and weekly upkeep. Specifications Pump pressure: 800 PSI (55.1 bar), 7.8A solution pump Heater: 1500-watt inline Vacuum motors: Two 2-stage, parallel, 2 @ 120V, 8.5A, 1020W Airflow / water lift: 200 CFM (5.66 CMM) / 92" (2337 mm) sealed water lift Discharge pump: 25 GPM (94.6 LPM), 5A, automatic Solution tank: 11 gallon Recovery tank: 11 gallon (41 L) Vacuum hose: 25 ft, 2" port (drops to 1.5" with included enlarger cuff) Solution hose: 25 ft Power: Two 25 ft 12/3 cords, runs on two separate circuits (Circuit 1: 120V, 19A, 2280W / Circuit 2: 120V, 15.6A, 1872W) Dimensions: 28"L x 17.7"W x 38.5"H Weight: 123 lbs (55.8 kg) Noise: Under 68 dB(A) at 10 ft on carpet Warranty: 3-year on the polyethylene housing, 1-year on the rest of the machine Bonus Ships with $600 in TMF Academy training included: Carpet Cleaning Tech and Upholstery Cleaning Tech. Learn the machine and the trade before your first job. A note on chemistry: Don't run acidic chemicals through the pump and metering system. It's not covered under warranty and it'll shorten the pump's life. Pre-apply acidic products separately and rinse with the machine. Download the Operator and Parts Manual (PDF)
