Unleash iconic vintage British tones with the Royalist MKIII! The original Royalist was the first Tone King amp to tackle British tones and quickly became one of their most beloved models. Now, introducing the new Royalist MKIII, a 40-watt, two-channel, all-tube masterpiece that takes this legacy to new heights! From the sweet, singing JTM45 to the iconic Plexi sound, all the way to the raging Super Lead, the Royalist MKIII captures the essence of these legendary amps, delivering a versatile range from clean to edge-of-breakup, to the crunchy leads heard on countless classics. Two Channels with Independent Volume and Pull Fat Feature. Both Channel A and Channel B feature Volume controls with a Pull Fat option, which adds more low-end at the first gain stage. The Fat setting is perfect for clean tones and single-coil pickups, or to add some juicy goodness to your lead tone. Three-Way 1964, 1967, and 1970 voicing switch, assignable to each channel. The 1964, 1967, and 1970 three-position voicing switch on each channel lets you choose the preamp, tone stack, and negative feedback from three of the most iconic vintage British amplifiers. Tone King’s legendary Iron Man II attenuator on for each channel. With the built-in Iron Man II attenuator on each channel, you get a tuned reactive load and special compensation circuitry that allows the power tubes to be fully driven while only allowing a fraction of the signal through to the speaker. Tone King Royalist MK3 Combo Amplifier Features: • Faithfully reproduces the iconic British tones of the 1960s! • Power: 40W. • Tubes: 3 x 12AX7, 2 x EL34. • Two channels with independent Volume and Pull Fat feature. • 1964, 1967, and 1970 voicing switch, assignable to each channel. • Built-In Ironman II Attenuator. • Speaker: Custom-designed Eminence. • Cabinet tuned to retain "full stack" feel at low volume. • Dimensions: 24 1/8" x 18 3/4" x 9 5/8”. • Weight: 59 pounds.
