If you are purchasing a Cognito Moto Triple clamp and want us to incorporate indicators into the clamps. Mod include 5 LED's. We cut out the clamp on the front and back to incorporate these for a very clean look. Just add the clamp needed then add this item. Will come fully assembled. Perfect for running simple gauges that do not have indicator lights. Specs: Can be incorporated into any of our Cognito Moto clamps 5 Leds Yellow Green Blue Red Yellow INSTRUCTIONS LED Wires: Each LED has: A positive wire (colored to match the LED light color). A black wire (for ground). Identifying Black Wires: Use a battery to systematically test each colored wire by connecting it to the positive side of the battery. Check each black wire individually to identify which LED it corresponds with through a process of elimination. Yellow LEDs (Turn Signals) & Blue LED (High Beam): Positive Wire (yellow for turn signals, blue for high beam) should connect to the respective turn signal or high beam circuit. Black Wire connects to ground. Red LED (Oil Light) & Green LED (Neutral Light): Positive Wire (red for oil light, green for neutral light) should connect to a 12V source that is key-switched on (i.e., only powered when the ignition key is on). Black Wire connects to the oil switch and neutral switch, respectively. Note: These LEDs are ground-switched rather than 12V-switched (like the turn signals and high beam), so they activate when grounded.
