Rubber Base is a transparent, elastic base used as a priming and/or main layer before coating. It serves as a base coat under gel polish. Rubber Base has a medium consistency, allowing it to level in one drop. It should be used as a main layer only for short or medium-length nails. For long nails, it is recommended only as a priming layer. Allowable leveling should not exceed 1 mm. It is not recommended to use in pedicures. Advantages of Rubber Base: ElasticityAdhesivenessMedium consistency (helps in leveling with one drop)Does not flowLasts for 3 weeksFunctions as both a foundation and leveling layer Features: Not recommended for pedicures Application Method: Standard nail plate preparation:Surface filing with a 240 grit file or bufferDegrease the nail plateApply a dehydratorPrimer/ultrabond (acid-free primer) should be applied with a semi-dry brush, avoiding skin contact. Best applied to the nail tip without layering. Apply the base in a thin or rubbing layer. Cure. If the base was used as a foundation, it is recommended to remove the sticky layer. Perform standard leveling with the base. The maximum thickness at the apex should not exceed 1 mm. File the nail edge to form thickness and structural shape. Curing Time: LED lamp (48W) - 60 seconds
