Tow-Pro Universal Remote Head Mount

Home of 12 Volt Northern Verified independent store

→

🎛️ REDARC TOW-PRO UNIVERSAL MOUNT / SWITCH INSERT TPSI-001 Universal Tow-Pro Remote Head Mount – OE-Style Finish, Up to 7mm Panel Thickness & ADR21-Compliant Installation 🔧 Create a clean, professional factory-style installation for your REDARC Tow-Pro remote head with this universal dashboard switch insert. The REDARC TPSI-001 Universal Tow-Pro Switch Insert is designed to assist installation of a compatible Tow-Pro remote head into a wide range of vehicle dashboards and panels. Designed to deliver an OE-style appearance, the universal mount allows installers to integrate the Tow-Pro remote control neatly into the vehicle interior while maintaining ADR21 compliance when fitted correctly. Supporting panel thicknesses up to 7mm and using a simple push-fit installation method, the TPSI-001 is a practical solution for custom Tow-Pro installations where a vehicle-specific switch insert is unavailable or unsuitable. ⚡ KEY FEATURES 🎛️ Universal Tow-Pro Remote Head Mount Designed to assist installation of a compatible REDARC Tow-Pro remote head into a wide range of vehicle dashboard and panel locations. 🚗 OE-Style Appearance Creates a clean, professional installation designed to blend neatly with the vehicle interior. 📏 Supports Panels Up to 7mm Thick Provides installation flexibility across a range of suitable dashboard, console and trim-panel thicknesses. 🔧 Simple Push-Fit Installation Designed to install using a straightforward push action once the mounting location has been correctly prepared. 📐 Drilling Template Included Supplied with a drilling template to assist accurate preparation of the mounting location. 🛠️ Gaskets for Curved Dash Surfaces Self-adhesive gaskets are supplied to help achieve a professional fit on compatible curved dashboard surfaces. 🛡️ ADR21-Compatible Installation Designed to maintain ADR21 compliance when correctly fitted according to the applicable installation requirements. 📦 Compact 38mm × 28mm Face Provides a neat installation footprint while accommodating the Tow-Pro remote-head control. ⚖️ Lightweight Construction Weighs approximately 50g for a compact, low-mass dashboard installation. 🛡️ 2-Year Warranty Backed by the supplied REDARC 2-year warranty. 🎛️ CLEAN OE-STYLE TOW-PRO INSTALLATION The TPSI-001 is designed for installers who want the Tow-Pro remote control to look integrated into the vehicle rather than added as an obvious aftermarket component. Its compact face and simple mounting arrangement allow the remote head to be positioned in an appropriate dashboard, console or trim-panel location while maintaining a neat finished appearance. This makes the universal insert particularly useful where a dedicated vehicle-specific switch insert is not available. 📏 SUITS PANELS UP TO 7MM THICK The universal switch insert can accommodate suitable panel thicknesses up to approximately 7mm. This provides greater flexibility when selecting a dashboard or console location for the Tow-Pro remote head. ⚠️ IMPORTANT: Always confirm the actual panel thickness, available clearance behind the mounting surface and accessibility of the Tow-Pro control before drilling or modifying the vehicle interior. 🔧 SIMPLE PUSH-FIT DESIGN The TPSI-001 is designed around a straightforward push-fit installation method. Once the mounting position has been correctly measured and prepared, the insert can be fitted into the panel to provide a secure and professional mounting point for the compatible Tow-Pro remote head. The supplied drilling template assists with preparing the installation area accurately. 🛠️ DESIGNED FOR FLAT & CURVED DASH SURFACES The kit includes self-adhesive gaskets intended to assist installation on compatible curved dashboard surfaces. These components help installers achieve a cleaner fit and more professional appearance where the selected mounting panel is not completely flat. Always ensure the finished mounting location allows correct operation of the Tow-Pro remote control. 🛡️ ADR21-COMPLIANT WHEN CORRECTLY INSTALLED The REDARC Tow-Pro Switch Insert is designed to allow an OE-style remote-head installation while maintaining ADR21 compliance when fitted correctly. Correct positioning and installation remain important, particularly when mounting controls within the vehicle dashboard and driver area. ⚠️ IMPORTANT: ADR21 compliance depends on correct installation. Follow the supplied REDARC fitting requirements and use a suitably qualified installer where appropriate. 🚙 UNIVERSAL VEHICLE APPLICATION The TPSI-001 is the universal model in REDARC’s Tow-Pro switch-insert range. It is designed for custom installations where the mounting location can accommodate the universal insert rather than relying on a specific factory switch opening. Potential installation locations may include compatible: Dashboard panels Centre consoles Switch panels Accessory panels Custom trim panels Other suitable vehicle interior mounting surfaces 📐 PRODUCT SPECIFICATIONS Brand: REDARC Product: Tow-Pro Universal Switch Insert / Universal Mount Part number: TPSI-001 Application: Tow-Pro remote-head mounting Design: Universal Maximum compatible panel thickness: Up to 7mm Installation method: Push-fit Face height: Approximately 38mm Face width: Approximately 28mm Weight: Approximately 50g GTIN / Barcode: 9338628004553 Warranty: 2 Years ADR21: Designed to maintain compliance when correctly installed 📦 WHAT’S INCLUDED? 1 × REDARC TPSI-001 Universal Tow-Pro Switch Insert Drilling template Self-adhesive gaskets for compatible curved dashboard installations ⚠️ Tow-Pro brake controller and remote-head components are not stated as included with the TPSI-001 and should be purchased separately unless your specific package expressly states otherwise. 📦 BULK PACK OPTION The REDARC Universal Tow-Pro Switch Insert is also available as a bulk pack of 10 under part number TPSI-001-B. This can be useful for professional installers, workshops and businesses carrying out multiple Tow-Pro installations. ⚠️ This listing is for the individual universal mount unless specifically stated otherwise. ⚠️ FITMENT & INSTALLATION INFORMATION Please confirm your intended mounting location and Tow-Pro configuration before purchase or modification of the dashboard. Check the following: Compatible REDARC Tow-Pro remote head Available dashboard or panel space Panel thickness – maximum 7mm Clearance behind the mounting surface Remote-head cable routing Accessibility from the driver’s position Panel curvature Correct use of supplied gaskets where required ADR21 installation requirements Safe location away from vehicle controls and safety equipment ⚠️ IMPORTANT: Confirm sufficient clearance behind the selected mounting point before drilling. Check for wiring, airbags, structural components, ventilation ducts and other equipment that could be damaged or obstructed. ⚠️ REDARC recommends installation by a qualified auto electrician or technician. ❓ FREQUENTLY ASKED QUESTIONS What is the REDARC TPSI-001? The TPSI-001 is a universal switch insert designed to provide a clean mounting point for a compatible REDARC Tow-Pro remote head. Is this a Tow-Pro brake controller? No. The TPSI-001 is a mounting accessory for the Tow-Pro remote head. The actual brake controller is not stated as included. What is the purpose of the universal mount? It allows an installer to create a clean OE-style mounting position for a Tow-Pro remote head in a suitable vehicle dashboard or interior panel. Is the TPSI-001 vehicle specific? No. TPSI-001 is the universal model and is intended for custom mounting applications rather than a single specific vehicle switch opening. How thick can the mounting panel be? The supplied specifications state that the universal switch insert can accommodate suitable panels up to approximately 7mm thick. How is the TPSI-001 installed? The universal insert uses a simple push-fit installation method once the selected panel has been correctly prepared. Does it include a drilling template? Yes. A drilling template is supplied to assist with preparing the mounting location. Can it be fitted to a curved dashboard? The kit includes self-adhesive gaskets designed to assist with suitable curved-dashboard installations and help create a professional finished appearance. Does it look factory fitted? The TPSI-001 is designed to create an OE-style appearance when correctly integrated into a suitable dashboard or panel. Is it ADR21 compliant? The supplied information states that the switch insert allows the installer to maintain ADR21 compliance when the remote-head installation is completed correctly. What are the face dimensions? The supplied face dimensions are approximately 38mm high × 28mm wide. How much does the TPSI-001 weigh? The supplied weight is approximately 50g. What is the TPSI-001 barcode? The supplied GTIN / barcode is 9338628004553. What warranty does the TPSI-001 have? The supplied product information lists a 2-year warranty. Does the TPSI-001 include the Tow-Pro remote head? No Tow-Pro remote head is stated as included. The TPSI-001 is the mounting insert and related fitting components only. Can I use this instead of a vehicle-specific switch insert? It may be suitable where a universal custom mounting location is preferred or a suitable vehicle-specific insert is unavailable. Confirm panel dimensions, clearance and Tow-Pro compatibility before installation. Can it be mounted anywhere on the dashboard? No. The mounting position must have sufficient panel space and rear clearance, allow safe access to the remote head and avoid interference with airbags, wiring, vehicle controls and other safety-critical components. Do I need to check behind the dash before drilling? Yes. Always check behind the proposed mounting location before drilling to ensure there are no airbags, wiring looms, ventilation ducts, structural components or other equipment in the way. Is a professional installer recommended? Yes. REDARC recommends installation by a qualified auto electrician or technician. Is there a bulk version available? Yes. A bulk pack containing 10 universal switch inserts is available under part number TPSI-001-B. Is this listing for the bulk pack? No. Unless specifically stated otherwise, this listing refers to the individual TPSI-001 Universal Tow-Pro Switch Insert. How do I know if the TPSI-001 will suit my vehicle? Check that your vehicle has a suitable mounting surface with enough space for the approximately 38mm × 28mm face, a panel thickness of no more than 7mm, sufficient clearance behind the panel and an appropriate route for the Tow-Pro remote-head cable. 🎛️ CREATE A CLEAN OE-STYLE TOW-PRO INSTALLATION Choose the REDARC TPSI-001 Universal Tow-Pro Mount when you need a professional and flexible solution for integrating a compatible Tow-Pro remote head into your vehicle interior. With support for panels up to 7mm thick, a simple push-fit design, supplied drilling template and self-adhesive gaskets for suitable curved surfaces, the TPSI-001 helps create a neat, factory-style Tow-Pro installation. Finish your Tow-Pro installation with a clean and professional REDARC universal mounting solution. Show more