Insulation Tower Jacket - 3"This unit has been designed to fit our standard 1, 2 and 3 tap (3" - 76 mm ) beer tower.Keep your beer icy cold with this insulation tower/ font cover right out of the first drop. Most kegerators that we sell include a font fan that blows cold fridge air up the font. With that said heat loss from the stainless font surface causes the font temperature to rise meaning that small amount of beer contributes to the "first pour foam effect".These EXTRA THICK neoprene covers are made from 7 mm thick meaning your beer will stay cold even if the hot Australian sun is beating down directly on the font.This saves power as it reduces electrical ingress meaning your fridge is not working as hard and you pay less in power. So this thing practically pays for itself.HOW TO INSTALL 1. Remove taps from the font. (no need to remove the shank from the font just the taps). 2. Pull the insulated cooler down over the font 3. Mark the tap holes and use a sharp pair of scissors to cut a hole in the neoprene jacket. 4. Re-attach the taps NOTE: Nail cutting scissors are particularly good for this application.
