The TP−581T is a high−quality twisted pair transmitter for HDMI, Ethernet 100BaseT, bidirectional RS−232 and IR signals. The TP−581T takes the HDMI input, and converts it with the Ethernet 100BaseT, RS−232 and IR input signals to a twisted pair signal. The TP−582R converts the twisted pair signal back to Ethernet 100BaseT, RS−232, IR and two HDMI outputs, and de−embeds the audio to S/PDIF and TOSLINK® audio outputs. - Max. Data Rate - 2.25Gbps. - HDBaseT Technology. - HDTV Compatible. - HDCP Compliance. - HDMI Support - HDMI (V.1.4 with Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS−HD, CEC). - 3D Pass-Through. - EDID PassThru - Passes EDID signals between the source and display. - Bidirectional RS-232 Interface - Commands and data can flow in both directions via the RS−232 interface, allowing status requests and control of the destination unit. - Ethernet Interface - Passes 100BaseT. - System Range - Up to 100m (330ft). - Cable - Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's BC−DGKat524, BC−DGKat623 and BC−DGKat7a23 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non−Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground. - Control - Front panel. - Indicators - Status LEDs for input selection, output, link and power. - Compact MegaTOOLS® - 2 units can be rack mounted side−by−side in a 1U rack space with the optional RK−T2B universal rack adapter.
Related
Related
Related
Related