Built to make your first guitar build achievable, this kit features a bolt on neck, pre mounted electronics, and a solid mahogany body shaped for comfortable access and easy finishing. The single cut profile and pearl white pickguard provide a clean foundation for custom paint and hardware choices. A practical entry point for beginners wanting hands on guitar building experience. Full Specifications General Dexterity: Right-Handed Number of Strings: 6 Size: Full Size Build Difficulty: Beginner (3/10) Fixed bridge with pre-drilled mounting keeps intonation setup simple Bolt-on neck joint bolts straight on, so there is no gluing or clamping to get right Mahogany has open grain that needs filling before finishing for a smooth result Body Material: Mahogany (2-4 pcs) Type: Solid Cutaway: Single Binding: None Top Veneer: None Upper Bout: 9.5" (241mm) Lower Bout: 13.5" (343mm) Neck Material: Mahogany Joint: Bolt-on Profile: C-shaped Truss Rod: Two-Way, Adjustable Scale Length: 25.5" (648 mm) Binding: None Fretboard Material: Rosewood, 12″ radius Radius: 14" / 356mm Number of Frets: 22 Fret Wire: Stainless Steel Fret Size: Medium Jumbo Inlay Shape: Dot Inlay Material: White Plastic (ABS) Headstock Shape: Standard (as in product images) Binding: None Nut: Bone Electronics Neck Pickup: Single Coil Middle Pickup: Single Coil Bridge Pickup: Single Coil Controls: 1 Volume, 1 Tone, 5-way selector Wiring: DIY (soldering required) Wiring Diagram: SSS, 1 Volume, 1 Tone, 5-Way Switch Output Jack: Side jack Hardware Bridge: Hardtail Tuners: Closed Pickguard: Pearl White Knobs: Chrome Cavity Covers: None Strings: Steel Finish: Chrome What's in the Box Single-cutaway mahogany guitar body (unfinished) White pearl pickguard pre-loaded with three black single-coil pickups, two potentiometers and a switch Guitar neck with rosewood fretboard and pearl dot inlays (unfinished) 6x chrome sealed tuners with bushings, washers and mounting screws Chrome hardtail bridge with six individually adjustable saddles Chrome output jack assembly 2x chrome knurled knobs Black switch tip Black truss rod cover with screws Chrome neck plate with four screws Chrome string retainer 2x black strap buttons with felt washers and screws Assorted mounting screws Set of guitar strings Allen wrench Black instrument cable What You'll Need You will need to solder the electronics. Depending on the finish you choose, the tools below cover a standard build. For assembly: Phillips screwdriver, Allen wrench set For wiring: Soldering iron, solder, wire cutters For finishing: Sandpaper (220-600 grit), wood grain filler, primer, paint or stain, clear coat For setup: String winder, guitar tuner, Allen wrench for truss rod and saddle height adjustment No woodworking or routing required - all cavities, holes, and channels are pre-cut.
Related
Related
Related
Related