Product Details Rust-inhibitive formula provides extra protection for sand-blasted or severely pitted surfaces. Comfort spray tip with a wide finger pad prevents finger fatigue while providing excellent spray control. Any-angle spray feature even sprays upside down for hard-to-reach areas. Excellent rust coverage Best choice for metal Long-lasting protection and beauty • Applies directly to metal; primer not required on most applications John Deere® is a registered trademark of Deere and Company Specifications Recommended For Use On Ferrous metal and properly prepared non-ferrous surfaces. Ideal for outdoor furniture, railings, tools, machinery, and metal structures before applying TREMCLAD® Rust Paint topcoats. Key Feature(s) Provides excellent rust protection and promotes superior adhesion of topcoats. Fast-drying, oil-based formula in convenient aerosol form. Suitable for indoor or outdoor use. Interior/Exterior Interior / Exterior Available Colors Red Oxide • Grey • Brown Product Type Oil-Based Rust Primer Aerosol Resin Type Modified Alkyd Pigment Type Iron Oxide (Red), Titanium Dioxide (Grey), Talc, Zinc Phosphate Fill Weight 340 g (12 oz) Volume Solids (±2%) Approx. 40–45% Coverage (Sq. Ft./Can) 8–12 sq. ft. (0.7–1.1 m²) at 1–2 mils DFT Recommended Film Thickness (mils) Wet: 3–4 • Dry: 1–2 Dry Time (77°F, 50% RH) Touch: 20–30 min • Handle: 1–2 hrs • Recoat: Anytime after 1 hr or after 48 hrs Full Cure (Days) 1–2 days Application Temp Range (°F) 50–90 Application Method Aerosol spray; hold 10–16" (25–40 cm) from surface and apply in light, even coats. Multiple thin coats recommended. Clean Up Xylene or Mineral Spirits Flash Point -96°C (Propellant blend; extremely flammable aerosol) Specific Gravity 0.85–0.88 VOC Range < 500 g/L typical Dry Heat Resistance 200°F (93°C) MIR (Max Incremental Reactivity) Red Oxide: 0.68 • Grey: 1.13 • Brown: Similar range Shelf Life 5 years (unopened) Primary Solvents Acetone, Naphtha, n-Butyl Acetate, Hydrotreated Distillates Protective Pigments Zinc Phosphate, Zinc Oxide Compliance / Certifications VOC Compliant ✓ CFIA Approved (select colors) ✓ Lead-Free ✓ Limitations Do not apply in high humidity or to hot surfaces. Not for immersion or continuous water contact. Avoid spraying near open flame, as highly flammable. SDS SAFETY DATA SHEETS Colour Safety Data Sheets (SDS) Red Oxide English - Español - Français Grey English - Español - Français Galvanized White English - Español - Français
