Cyclone locks in a clean, natural look with a matte finish. It will protect the surface from a variety of contaminants and makes cleaning and maintenance easier. Cyclone will harden joint sand which helps reduce sand washout, weeds and insect infestation. An added anti-fungal protects the sealer film from mold, moss and algae. Cyclone is a water based film forming sealer. SURFACE ENHANCEMENT Minimal to slight enhancement with matte finish - the extent of enhancement is dependent on the surface JOINT STABILIZATION Hardens joint sand which reduces sand washout, weeds and insect infestation SURFACE PROTECTION Guards against salt, mild acid, alkali and other corrosives Provides stain resistance which makes cleaning and maintenance easier Antifungal film protection protects sealer film from mold, moss and algae HARDENS JOINT SAND Prevents sand erosion and deters weeds/insects ONE EASY APPLICATION Protects surface and stabilizes sand joints in one application SURFACE APPEARANCE FRESHENER Locks in a clean, natural look with matte finish ADVANCED SINGLE COMPONENT, ACRYLIC CO-POLYMER FORMULA Will not yellow under exposure to sunlight Offers long term durability FUNGAL GUARD Added antifungal protects sealer film from mold, moss and algae BREATHABLE, IMMEDIATE APPLICATION Will not trap naturally occurring efflorescence and/or moisture Can be applied on a new, clean and dry surface without waiting FILM FORMING, WATER BASED, LOW VOC SEALER Consistency of water, milky white in appearance when applied. Dries clear. Environmentally friendly, EPA compliant TEMPERATURE STABLE Cured sealer is freeze resistant to -60°F (-51°C) and is stable up to 180°F (82°C) SUITABLE SURFACES Concrete Stamped Concrete Concrete Wall Block Clay Pavers Natural Stone Manufactured Stone Travertine Exposed Aggregate Not recommended for marble, granite, ceramic tile and polished, honed or high gloss surfaces as they do not have enough surface texture to absorb the sealer. PERFORM A TEST IN A SMALL AREA TO VERIFY PERFORMANCE AND APPEARANCE BEFORE APPLYING. Due to the variability and physical make-up of natural stone this step is required to verify desired performance and appearance. COVERAGE PER GALLON SEALING WITH JOINT STABILIZATION 80-120 square feet 7.4-11.1 square meters SEALING ONLY WITHOUT JOINT STABILIZATION 150-250 square feet 13.9-23.2 square meters Coverage based on single application. Actual coverage may vary depending on the type, age, condition, joint size and porosity of the surface, application method and other local conditions such as temperature and humidity. For more uniform coverage or if desired a light second coat may be applied after the first coat has dried to the touch. Download SDS Sheet Download Data Sheet
