Ultimate New Generation 2-Part Urethane Wet Look Sealer Hurricane CAT 5 is the ultimate in 2-part sealers made with a new generation urethane providing ultra-durable surface protection. Its Armor Bond joint stabilization hardens joint sand to prevent sand washout. It provides the deepest color enhancement with high-gloss finish using T3 True Tone Technology. It has an added antifungal that protects the sealer film from mold, moss and algae. Hurricane CAT 5 is a super concentrated water based film forming sealer that comes as a kit and requires mixing and dilution before use. Recommended for professional use only. Purpose ULTRA SURFACE ENHANCEMENT Deeply enhances surface with wet look and gloss finish - the extent is dependent on the surface OPTIMAL JOINT STABILIZATION Hardens joint sand which reduces sand washout, weeds and insect infestation ULTIMATE SURFACE PROTECTION Guards against salt, mild acid, alkali and other corrosives Provides stain resistance which makes cleaning and maintenance easier Antifungal film protection protects sealer film from mold, moss and algae Features ARMOR BOND Creates strongest joint stabilization T3 TRUE TONE TECHNOLOGY Deepest color enhancement with high-gloss finish ULTRA DURABILITY SURFACE PROTECTION Ideal for high traffic areas where ultimate durability and superior chemical resistance is desired FUNGAL GUARD Added antifungal protects sealer film from mold, moss and algae BREATHABLE, IMMEDIATE APPLICATION Will not trap naturally occurring efflorescence and/or moisture Can be applied on most new, clean and dry surfaces without waiting DRY OR DAMP, TWO COAT APPLICATION Apply to dry surface for optimal joint stabilization performance When sealing without joint stabilization, can be applied to a dry or damp surface with no pooling or ponding of water present For optimal performance, apply two coats PROPRIETARY TWO-PART WATER REDUCIBLE, CLEAR ALIPHATIC URETHANE CHEMISTRY Super concentrated sealer packaged as a kit containing one 5 gallon pail of Part A and two 1 gallon containers of Part B. Mixing required. Water dilution required providing options for desired level of sheen and strength of joint stabilization Will not yellow under exposure to sunlight FILM FORMING, WATER BASED, LOW VOC SEALER Consistency of water, milky white in appearance when applied. Dries clear. SUITABLE SURFACES CONCRETE STAMPED CONCRETE CONCRETE WALL BLOCK CLAY PAVERS NATURAL STONE MANUFACTURED STONE TRAVERTINE EXPOSED AGGREGATE Not recommended for marble, granite, ceramic tile and polished, honed or high gloss surfaces as they do not have enough surface texture to absorb the sealer. PERFORM A TEST IN A SMALL AREA TO VERIFY PERFORMANCE AND APPEARANCE BEFORE APPLYING. Due to the variability and physical make-up of natural stone this step is required to verify desired performance and appearance. ADDITIONAL TOOLS NEEDED Variable speed drill, paddle mixer Clean five gallon pail(s) Low pressure, high volume sprayer such as an airless sprayer or hand held pump-up sprayer Foam squeegee for joint stabilization Slit foam roller Paint shield COVERAGE PER GALLON SEALING WITH JOINT STABILIZATION 80-120 square feet 7.4-11.1 square meters SEALING ONLY WITHOUT JOINT STABILIZATION 200-300 square feet 18.6-27.9 square meters Coverage per gallon once mixed and diluted. Single application. Actual coverage may vary depending on type, age, condition, joint size and porosity of the surface, application method and other local conditions such as temperature. For more uniform coverage, a second coat should be applied as soon as practical after the first application has visually cleared and is dry to the touch, which is usually one hour. Videos Mixing & Diluting How To Flood Coat & Squeegee Application for Joint Stabilization Joint Sand Installation Spray & Back Roll Application for Sealing without Joint Stabilization Four Steps to Surface Restoration Equipment Trident Downstream Manifold Additional Information Sell Sheet Safety Data Sheet Technical Data Sheet
Related
Related
Related