There are truing stands and then there is The Truing Stand. What's long been a bike shop staple isn't always the most glamorous tool in the shop, in fact it's usually a pretty basic device. But the work that comes off the truing stand is often the thing bike shop hero's are made from, the legendary perfectly built wheel. So what if we revisit the lowly truing stand, approach it like a piece of metrology equipment instead of something that does little more than hold a wheel? There's so many ways to 'hack' a truing stand, if you're going to make a proper tool why not go all out? We set out to make a truing stand like no other, something that had a stable base as a foundation for precision and repeatability. We wanted the stand to reliably mirror on a centerline so it would always be in dish regardless of hub or rim width. We needed a good thru axle solution that didn't require adapters. In the disc brake era we wanted to be able to straighten rotors while the wheel was in the stand. We wanted a stand that was equally at home truing wheels for a general tune up as it was building wheels worthy of elite competition. We added the ability to run dial indicators for radial and lateral deviation and you can run one for the rotor if you'd like. Design is all about compromise and we spent nearly 6 years thinking and tinkering this one, the results do not disappoint. Igus drive components for nearly maintenance-free operation. Linear rails for smooth movement of the uprights. Lateral indicators ride on sealed cartridge bearings for smooth operation. Indicators operate on a push pull motion so they are always mirrored from centerline. The radial indicator can be positioned wherever you like or used for single sided lateral truing if desired. Optional Mitutoyo analog indicators for enhanced accuracy. If you would like to be the first on your block to own one, stay up to date and sign up for our newsletter at the bottom of this page. We will do a media blast about the next production run soon. Made in Bend Oregon.
