K03 to K4 Height Adjuster Upgrade Its design allows you to set the sharpening angle faster, easier, and with greater precision. All moving elements of the lift are locked with one hand, ensuring secure fixation in the selected position. Three-step Angle Setting The system offers three methods of angle adjustment: coarse adjustment (up to 1° accuracy) using the slider; fine adjustment (up to 0.1° accuracy) using the rack-and-pinion height adjuster; ultra-fine adjustment (up to 0.01° accuracy) using the micro-adjustment mechanism. The micro-adjustment assembly allows angle changes with precision finer than 0.1°, which is especially useful for burr removal and when working with ultra-fine abrasives. The micro-adjustment is locked with an eccentric lever. When left unlocked, the lever visually indicates that fixation is required before operation. Matte Black Anodizing The main body components of the lift are made from aerospace-grade aluminum with a matte black anodized finish. This is not just an aesthetic choice, but a technical solution that improves the durability of the product. The coating protects the metal from corrosion and minor mechanical damage, resists fading over time, and withstands environmental exposure. The pleasant matte surface requires minimal maintenance while preserving the professional appearance of your tool throughout its service life. K03 Mounting Instruction This height adjuster is compatible with the TSPROF K03 sharpening systems. Installation requires removing the two mounting screws located at the bottom of the sharpening system stand using a 3 mm hex key. Install the TSPROF K4 rack-and-pinion lift and secure it with the screws. Specifications Dimensions 90 × 80 × 230 mm Weight 750 g Attention! The standard parking hook from the TSPROF K03 sharpening system does not provide reliable fixation of the guide rod in the hinge unit of the K4 rack-and-pinion height adjuster. For secure fixation of the guide rod, we recommend purchasing the TSPROF K4 Parking. Set Includes TSPROF K4 Rack-and-Pinion Height Adjuster, Matte — 1 pc. 3 mm Hex Key — 1 pc. M4×16 DIN 912 Screw — 2 pcs. Attention! In accordance with requirements for anodic oxide coatings, slight differences in shade may occur depending on the alloy grade and part geometry. This is not a defect, but a technological characteristic that confirms the authenticity of true anodizing. The product fully retains all protective and performance properties.
