Tsunami Water Separators Manufacturer: Tsunami Part Number: 21999-0390, 21999-0390-ED, 21999-0390-MM, 21999-0960-MM, 21999-0960-ED, 21999-0960, 21999-1120-MM, 21999-1120-ED, 21999-1120, 21999-1096-MM, 21999-1096-ED, 21999-1096, 21999-0082-MM, 21999-0082-ED, 21999-0082, 21999-1034-MM, 21999-1034-ED, 21999-1034, 21999-0131-MM, 21999-0131-ED, 21999-0131 Description: The Tsunami Water Separator is a high-quality filtration product that removes dirt, particulate, and water from compressed air systems. The Tsunami Water Separator uses a unique up-flow gravity separation process to remove water droplets and aerosols from the air before being discharged through an automatic drain. Drain Options Float Drain - Contains a float within the device that normally seats on a small orifice. When liquid enters the drain the float rises off its seat, exposing the orifice and allowing liquid to discharge through the stem. Pneumatic Drain - (Requires Pilot Signal) - An external condensate reservoir collects liquid. When the liquid rises to a set point a mechanical switch sends pilot air to an air cylinder that opens a ball valve, draining the reservoir and returning the piston to a relaxed position. Electronic Drain - (Requires Electricity) - Incorporates a solenoid valve and an electric timer with two on/off settings. ON is the setting for the amount of time the valve needs to stay open (0.5 to 10 seconds) and OFF is the time between openings (0.5 to 45 minutes). Premium Materials Tsunami filters are machined from high-quality 6061 Aircraft Aluminum and then anodized inside and out - providing industrial strength and preventing corrosion and rust. Oversized Tube Length Oversized tube length allows both gravity and velocity to assist in the removal of water and air contaminants. Removable Bottom Cap The removable bottom cap provides ease of service and the machined drain port allows for various drain options. Features & Benefits Point-of-use protection for air tools and pneumatic equipment Machined from 6061 aircraft aluminum Minimal maintenance is required with an easy-to-service float drain Removes large amounts of moisture (up to one quart of water or oil per minute) Filters particulate down to 10 microns Available for systems with a flow rating from 20 to 800 CFM Optional mounting bracket sold separately Made in America Part Number Description 21999-0846 20 Series Water Separator Service Kit 21999-0227 50 Series Water Separator Service Kit 21999-0228 120 / 240 Series Water Separator Service Kit (240 Requires TWO Kits) 21999-1098 300 Series Water Separator Service Kit 21999-1121 600 Series Water Separator Service Kit 21999-1005 800 Series Water Separator Service Kit 21999- Annual Maintenance Kit for 3-Stage Filter Packages Accessories 21999-0201 Drain Tube Kit - 10 Pack 21999-0867 Tsunami Mounting Kit - 20 Series Filters 21999-0144 Tsunami Mounting Bracket - 50 & 120 Series 21999-1126 Tsunami Mounting Bracket - 300 & 600 Series Outer Tube Replacement 21999-0386 Outer Tube Replacement - 20 Series 21999-0125 Outer Tube Replacement - 50 Series 21999-0078 Outer Tube Replacement - 120/240 Series 21999-1077-PL Outer Tube Replacement -300 Series 21999-1087-PL Outer Tube Replacement - 600 Series 21999-0962-PL Outer Tube Replacement - 800 Series Bottom Cap Replacement 21999-0388 Bottom Cap Replacement 20 Series 21999-0127 Bottom Cap Replacement 50 Series 21999-0182 Bottom Cap Replacement 120/240 Series 21999-1078 Bottom Cap Replacement 300 Series 21999-1088 Bottom Cap Replacement 600 Series 21999-0961 Bottom Cap Replacement 800 Series Heater Wraps 163-0644 Heater Wraps 20 & 50 Series - 110/120v AC, 100 W 163-0648 Heater Wraps 20 & 50 Series - 12 DC, 75 W 163-0646 Heater Wraps 20 & 50 Series - 24v DC, 100W 163-0649 Heater Wraps 120/240 (240 Series Requires two Wraps) - 110/120v AC, 100 W 163-0651 Heater Wraps 120/240 (240 Series Requires two Wraps) - 12 DC, 50 W 163-0650 Heater Wraps 120/240 (240 Series Requires two Wraps) - 24v DC, 100W 163-0656 Heater Wrap 800 Series 120v DC, 150 W
