Automate Your Dewatering with Tsurumi’s Intelligent Floatless Slimline Pump Technology The Tsurumi LB-480A is the professional's choice for smart, hassle-free water management in the most challenging environments. Engineered with a compact "slimline" profile, this 2/3 HP submersible dewatering pump is designed to fit into narrow 8-inch casings, utility vaults, and tight excavations where traditional pumps fail. What sets the LB-480A apart is its advanced integrated electrode relay switch. This floatless automatic technology detects water levels to start the pump and includes a smart timer function that prevents the rapid on/off cycling often caused by rough or turbulent water surfaces. Whether you are managing construction site runoff, foundation clean-ups, or municipal utility drainage, this pump offers "set it and forget it" reliability that protects your project and your motor. Durability is at the core of the LB-480A’s design. It features a high-performance semi-vortex impeller made of wear-resistant urethane, ensuring the pump maintains its original flow rate even as components age. The top-discharge flow-through design uses the pumped liquid to cool the motor, allowing for continuous-duty operation at low water levels and providing superior dry-run capability. For added versatility, the discharge direction can be adjusted to prevent the kinking or folding of your 2-inch hose. Equipped with Tsurumi’s legendary dual silicon carbide mechanical seals and a 32-foot heavy-duty power cord, the LB-480A delivers an incredible 3,780 gallons per hour while standing up to the abrasive sand and grit found on industrial job sites. Key Features Smart Electrode Relay Switch: Automatically activates the pump when water touches the sensors and includes a one-minute run-dry timer to clear the line. Slimline Confined Space Design: Ultra-compact diameter allows the pump to be deployed in pipes and utility openings as narrow as 8 inches. Wear-Resistant Urethane Impeller: Semi-vortex design maintains maximum performance even when pumping abrasive sand and sediment. Top Discharge Cooling: Engineered to maximize motor cooling efficiency, enabling continuous duty at low levels and extended dry-run protection. Dual Silicon Carbide Seals: Tsurumi’s legendary internal mechanical seals provide the best protection against water intrusion in the industry. Adjustable Discharge Direction: Discharge can be oriented to prevent hose kinking, ensuring a consistent 63 GPM flow rate. Extended Reach: Includes a 32-foot heavy-duty power cord for flexible placement across large construction sites and utility vaults. What's Included (1) Tsurumi LB-480A 2/3 HP Automatic Submersible Pump (1) Integrated Electrode Level Control Unit (1) 32-Foot Heavy-Duty Power Cable (1) 2-Inch Straight Male NPT Discharge Connection Specifications Brand Tsurumi Pump Model Number LB-480A Horsepower 0.67 HP (2/3 HP) Voltage 115V Phase Single-Phase Discharge Size 2 Inches Discharge Type Straight Male NPT Max Flow Rate 63 GPM (3780 GPH) Cable Length 32 Feet Max Solids Handling 0.236 Inches Operation Mode Automatic (Electrode Relay) Impeller Material Urethane Rubber Pro-Tip: To keep the automatic sensor at peak sensitivity, occasionally wipe the electrode probes with a soft cloth to remove any oil film or mineral scale buildup. For the most secure job site setup, use a 2-inch discharge hose with cam-lock fittings to take full advantage of the pump's 63 GPM capacity without worrying about hose separation during high-pressure cycles.
Related
Related
Related
Related