The Proxxon Tungsten Vanadium Cutters (No. 28727) are a 2-pack of wheel profile rotary cutters in tungsten vanadium steel for Proxxon Micromot tools. Available with 2.35mm or 3.0mm shanks. The wheel profile — a disc-shaped cutter with a rounded or profiled edge — is the largest diameter in the TV cutter range at ×10mm, designed for edge routing, decorative profiling, and cutting rounded grooves and coves where the disc geometry produces a consistent curved cross-section. The wheel profile cuts primarily on its edge rather than its face, making it the specialist choice for routing decorative profiles along edges and cutting cove-shaped grooves. Head and shaft are machined from a single blank for maximum stability and concentricity. Key Features Wheel (disc) profile — edge-cutting geometry for decorative profiling, cove routing, and rounded groove cutting Largest TV cutter at ×10mm — for broader edge profiles and wider cove grooves Tungsten vanadium steel — broad material range: wood, NF metals, precious metals, plastics, plaster One-piece head and shaft — maximum stability, concentricity, and tool life Dual shank options — 2.35mm or 3.0mm to suit your collet 2-pack — two cutters per set Applications Edge routing and decorative profiling in wood Cove and rounded groove cutting Decorative edge work in NF metals and plastics Profiling and shaping along edges Precious metal edge profiling Specifications Part Number: No. 28727 Profile: Wheel (disc) Cutting diameter: ×10mm (13/32") Shank options: 2.35mm (3/32") or 3.0mm (7/64") Material: Tungsten vanadium steel Quantity: 2 per pack Materials cut: Hard and soft wood, NF metals, precious metals, plastics, plaster of Paris TV Cutter Profile Guide Cylinder (flat end) / No. 28722 — for slots, steps, and flat-bottomed pockets Cylinder Round / No. 28726 — for flat surface work with smooth end transitions Flame / No. 28724 — for contoured carving and concave shaping; most versatile profile Round (Ball) / No. 28725 — for concave hollowing, bowl shaping, and undercut work Rounded Cone / No. 28723 — for chamfering, angled surfaces, and V-groove work Wheel (Disc) / No. 28727 (this cutter) — for edge routing, decorative profiling, and cove groove cutting; largest TV cutter at ×10mm Works Well With Professional Rotary Tool IBS/E (No. 38481) — collet-based 100W Micromot tool with 2.35mm and 3mm collets Precision Rotary Tool FBS 115/E (No. 38472) — keyless chuck Micromot tool accepting both shank sizes MICROMOT Steel Collet Set — 6-Piece (No. 28940) — includes 2.35mm and 3mm collets for this cutter TV Cutters — Cylinder Round (No. 28726) — complementary profile for flat surface work after edge routing TV Cutters — Flame (No. 28724) — complementary profile for contoured surface transitions Learn More Not sure which cutter is right for your material? Read our Proxxon Micromot Cutter Guide — TV Steel vs. TC Burrs vs. TC Milling Cutters for a complete breakdown of all three cutter families. Returns can only be accepted for unused product in its original packaging. A copy of the original packing slip or invoice is required. For warranty claims please call 1-877-776-9966. See our full return and refund policy. California Residents Prop 65 Information WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Related
Related
Related
Related