Confirm before ordering Match replacement reference FRZ 17.2, the original part profile, dimensions, and installed position. Similar-looking rubber drive parts are not automatically interchangeable. Specifications FRZ 17.2 drive belt specifications Belt code FBS 17.2 (FRZ 17.2) Type Flat belt Circumference 17.2 in. (43.68 cm) Width .15 in. (4.0 mm) Thickness .03 in. (.9 mm) Material Rubber Country of origin Taiwan Equipment compatibility Compatible-equipment references The list below consolidates the established Dynamic Lamps applications for the exact FRZ 17.2 family. Notes about belt position or quantity remain part of the fit reference. GARRARD 40-B 40B Garrard: 40-B, 40B GARRARD 86-SB 86SB Garrard: 86-SB, 86SB GARRARD 100C 100S 100SC Garrard: 100C, 100S, 100SC GARRARD 125-SB 125SB Garrard: 125-SB, 125SB GARRARD GT-10 GT-12 GT-15 Garrard: GT-10, GT-12, GT-15, GT10, GT12, GT15 GARRARD GT-25 GT-35/P GT-55 Garrard: GT-25, GT-35/P, GT-55, GT25, GT35P, GT55 GARRARD GT-120AP GT120AP Garrard: GT-120AP, GT120AP GARRARD GT-250 GT-250P GT-250AP Garrard: GT-250, GT-250P, GT-250AP, GT250, GT250P, GT250AP GARRARD GT-350 GT-350A GT-350AP Garrard: GT-350, GT-350A, GT-350AP, GT350, GT350A, GT350AP GARRARD 0-100-SB 0100SB Garrard: 0-100-SB, ZERO-100-SB, 0100SB, ZERO100SB GARRARD SP-25 Mk V Garrard: SP-25, Mk, V, SP25MkV GARRARD SP-35 Mk V Garrard: SP-35, Mk, V, SP35MkV GARRARD V-VI VVI Garrard: V-VI, VVI GARRARD X-40-B X40B Garrard: X-40-B, X40B Model suffixes and production revisions can use different mechanisms. The service manual, model plate, and original part path take precedence. Related products and fit checks Before choosing another size No different size or profile is presented as an automatic substitute for FRZ 17.2. Circumference, width, thickness, cross-section, installed tension, and operating position all affect performance. Installation and safety Installation guidance Disconnect power and remove the platter or access cover as directed by the equipment manual. Remove belt residue and clean the motor pulley and belt path without leaving oil. Install the belt in the specified path without twists, then rotate the mechanism by hand before powering it. Follow the current equipment service instructions when they differ from this general guidance.
Related
Related
Related
Related