Full correction: cut the defects, finish to a showcar gloss The Two-Step Correction Kit pairs Pure Cut for fast defect removal with Perfect Polish for high-clarity finishing. Dialed pad pairings make the process predictable on most clears with a DA polisher. What’s inside Pure Cut (16 oz) + Perfect Polish (16 oz) Pads: MF Cutting (ETH-MCP-5) ×2, Orange (ETH-OPP-5) ×2, Black (ETH-BFP-5) ×1 Towels: Plush 470 – Gray ×3 Why it works Step 1: Microfiber + Pure Cut to level moderate/heavy swirls and RIDS. Step 2: Orange + Perfect Polish to refine; optional jewel with black pad. Low dust, easy wipe-off so you can move quickly panel to panel. How to use Decon wash & clay; tape sensitive trim. Cut: MF + Pure Cut, speed 4–5, moderate pressure, 2–3 section passes; wipe. Finish: Orange + Perfect Polish; reduce pressure for final slow pass; wipe. Optional: Black pad + a small amount of Perfect Polish to jewel. Panel-wipe and protect with Resist or your ceramic coating. Good to know Not for matte/satin paint or PPF. Always test a small section first. Deep through-clear scratches won’t fully remove by polishing alone.
