Ubiquiti UA-SK-Elevator Access Elevator Starter Kit

AV Express Verified independent store

→

Ubiquiti UA-SK-Elevator Access Elevator Starter Kit Product Details Connects to in-elevator readers with PoE to authorize floor selection. Supports up to 18 floors with digital inp uts for elevator car status and emergency. Specifications Overview In the Box: (1) Elevator Hub (1) G2 Reader (2) 2-wire PoE extenders (10) Access Cards Elevator Hub Dimensions: 129.3 x 244.7 x 33.6 mm (5.1 x 9.6 x 1.3") Power Method: PoE++ UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU Weight: 537 g (1.2 lb) Enclosure Material: Polycarbonate NDAA Compliant: ✓ Mounting Material: Polycarbonate Networking Interface: (4) 10/100/1000 Base-T PoE Interface: (1) PoE++ input, 50V DC, 1.2A (4) PoE outputs, 50V DC, 30W per port (Max 45W aggregated) Management: (1) 10/100/1000 Base-T Max. Power Consumption: 7W (Without PoE output) Digital Input: (1) Emergency (1) Car position (5-bit) (1) Car status: Up/Down/Stop/Full (1) Door status: Open/Close Outputs: (18) Relays Rating 30V DC/2A ESD/EMP Protection Air: ±8kV, contact: ±4kV LEDs: B/W Learn More Buttons: (1) Factory-reset Terminal blocks Ambient Operating Temperature: -10 to 40° C (14 to 104° F) Ambient Operating Humidity: 5 to 95% noncondensing Certifications: CE, FCC, IC, UL 62368-1, CSA C22.2 No. 62368-1 Software Information: The software version can be checked at https://unifi.ui.com G2 Reader Dimensions: 93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4") NFC Card & Keyfob Access: ✓ Mobile Unlock: ✓ Handwave Request to Exit: ✓ Weatherproofing: IP55 NDAA Compliant: ✓ UL 294 Level Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I Weight: 82 g (2.9 oz) Enclosure Material: Polycarbonate, glass Mount Material: Aluminum alloy Mounting: In-wall, gang box (Included) Junction box (Optional) Indoor and Outdoor Use: ✓ Ambient Operating Temperature: -30 to 45° C (-22 to 113° F) Ambient Operating Humidity: 5 to 90% noncondensing Networking Interface: (1) 10/100 MbE RJ45 port Connectivity: BLE 4.1 NFC Power Method: PoE UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU Max. Power Consumption: 5W Supported Voltage Range: 48V DC ESD/EMP Protection: Air: ±15kV, contact: ±8kV Sensors: Proximity sensor Speaker: (1) Yes, 0.7W LEDs: R/G/B/W Learn More Button: (1) Factory-reset NFC Read Range: < 30 mm (1.18'') NFC Frequency: 13.56 MHz NFC Technology ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340) MIFARE Classic / MIFARE DESFIRE Sony FeliCa™ (ID only) NFC Forum tags T1T, T2T, T3T, T4T and T5T PoE Cabling Requirements Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable. UL 294 Statement Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. CAN/ULC-60839-11-1 Grade Grade assignment: I Certifications: CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 Document number, and issue date and/or revision level UA-G2/UA-G2-Black, V02 Software Information: The software version can be checked at https://unifi.ui.com Access Card Dimensions: 85.6 x 53.98 x 0.84 mm (3.37 x 2.13 x 0.03") Weight: 5 g (0.18 oz) Format: ISO 7810 ID-1 NFC Frequency: 13.56 MHz NFC Technology: ISO/IEC 14443 Type A MIFARE DESFire UniFi Access Proprietary Security Protocol NDAA Compliant: ✓ Wire POE Extenders Model: UACC-Extender-2Wire-PoE-Tx/Rx Dimensions: 40 x 105 x 25 mm (1.6 x 4.1 x 1") Weight: PoE in: 77 g (2.7 oz) PoE out: 79 g (2.8 oz) Enclosure Material: Polycarbonate Mounting Material: Polycarbonate NDAA Compliant: ✓ Networking Interface: (1) 10/100 MbE (1) Homeplug AV PoE Interface: PoE input: (1) PoE++, 50V DC, Max. 1.2A PoE output: (1) PoE+, 48V DC, 0.72A Management: (1) 10/100 MbE Power Method: PoE++ Max. Power Consumption: 3W (Without PoE output) ESD/EMP Protection: Air: ±8kV, contact: ±4kV LEDs: White Ambient Operating Temperature: -10 to 40° C (14 to 104° F) Ambient Operating Humidity: 5 to 95% noncondensing Certifications: CE, FCC, IC Features (1) Elevator Hub (1) G2 Reader (2) 2-wire PoE extenders (10) Access Cards Show more