Introducing from UDI the 1:16 Full Scale High Performance 4WD Racing Speed & Drift BUG Racing Car.Available in Brushed and PRO Brushless version.Electronic Stability ProgramWhen the car slides or slips out of control, it can quickly and effectively be corrected in attitude and direction. The function and sensitivity of the gyroscope sensor can be adjusted and turned off by the ESP knob on the transmitter.High Speed Bearings (Throughout)The whole vehicle uses ball bearings to improve the mechanical transmission efficiency. With ball bearings, the friction is reduced, the transmission efficiency and power is improved, and mechanical damage is reduced at the same time.Planetary DifferentialHigh-strength nylon planetary differential (can be upgraded to metal differential), strong and wear-resistant.2 in 1 Receiver ESC box-4CH 2.4G waterproof, dust-proof design-Electronic Stability Program(ESP)-Low Voltage Cut Off and Thermal Overload Protection-Brake, BEC, LVC sensitivity, reverse speed settingsStrong Magnetic Motor7.4V, 380SM high performance power systemPower Supply7.4V, 1200mAh rechargeable LiPo batteryCool ModellingControl headlight with 3 lights modes.Metal CVD DriveshaftsTwo Set of TyresRC High Speed/Drift Car. Equipped with two sets of different tyres to suit different reasons and can be replaced easily.Bodyshell OverviewThe bodyshell is made with tough PVC materials and printed in a colourful way!Metal Bulkhead HangersThe reinforcement of the metal wishbone hangers enables the car to withstand greater impact.Model Level Remote Control Transmitter-2.4GHz full proportion radio remote control system-Steering range percentage adjustment-Electronic stability system (ESP)-Steering trim-4 channel transmitter-Failsafe protection function-Speed switchTechnical SpecificationsAssembly time: Less than half an hourHigh Speed Bearings: The whole carBattery: IncludedRemote Control Distance: About 50mPlaying Time: About 15 minutesBattery capacity: 7.4V, 1200mAhCharger: IncludeCompletion Level: Ready-to-runDifferential: Two oil-filled gearsDrivetrain: Four Wheel DriveDrive Type: Forward/Brake/ReverseFinal drive ratio: 6.05:1Front wheel track: 3.98 inch(101mm)Power Type: ElectricTooth pitch: 0.5 / 0.7 / 1.0MODBauchfreiheit: 0.39 inch(10mm)Internal gear ratio: 2.8:1.1Motor type: brushed motor/brushless motorGear: 16TProduct Length: 11.81″(300mm)Product Width: 5.91″(150mm)Product Height: 3.93″(100mm)Product Weight: 635.5gTransmitter: IncludedRear wheel track: 3.98″(101mm)Receiver: IncludedScale: 1/16Servo: IncludedSpeed controller: IncludedSpur gear: 38TSuspension: IndependentTruck type: Road RacingWheel base: 6.69″(170mm)
