UltiMaker Factor 4+ industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications. Key features of UltiMaker Factor 4+: Industrial-Grade Performance Constructed from robust steel, aluminum, and glass, Factor 4+ is built for the factory floor. The printer features a triple-insulated build volume, closed loop and direct drive dual extrusion, automatic inductive bed leveling, and a PEI-coated flexible build plate, ensuring consistent production output, even on complex and challenging designs. These features combined with the all-new H-bridge gantry and a rigid all metal frame allow for high-speed movement and accuracy. Automatic Material Handling and Storage The integrated, low moisture material handling system allows engineers to reliably manage their print jobs. The material station is climate controlled, with humidity levels kept below 15%, and holds up to six Core benefits Maximum Throughput, Zero Compromise Reliability, repeatability and validation. Built for 24/7 Industrial Cycles Part-Level Confidence with UltiMaker TRACE Built for the factory floor. The seamless, powerful upgrade that your production workflows demand. Factor 4 Plus elevates manufacturing with its triple-insulated build chamber and direct dual extrusion. The automated material handling system maintains filament quality. And the robust, temperature-controlled design ensures consistent production output also on complex and challenging designs. UltiMaker TRACE Technical Reporting And Certification Engine Total print transparency for strict compliance standards. Go beyond basic monitoring to provide the level of traceability required for rigorous industrial compliance. Throughout the entire print job, TRACE continuously logs and analyzes four key parameters. By monitoring this specific dataset in real time, the engine can instantly detect minor thermal or volumetric deviations that might affect part quality, layer adhesion, or mechanical performance. High quality. Every time. Anywhere. Success with every 3D print. The Factor 4 Plus features a fully isolated, thermally controlled print chamber that increases printing accuracy by maintaining a constant thermal gradient throughout the entire build envelope. By managing the ambient temperature precisely, this system minimizes internal stress and thermal shock as new layers are deposited. Built on more than 13 years of UltiMaker legacy – dedicated to innovation, accessibility, and openness. Improved- lifetime tested Gantry. Performed rigorous lifetime tests (15,000 hrs) to ensure maximum uptime in the field.The gantry is built to absorb unwanted vibrations when printing fast. This stability keeps the print process in check, ensuring precise parts even when the Cheetah motion planner pushes the printer to its limits. Automated material handling with low humidity storage Automatic pre-loading and spool switching (up to 6) with RH < 15% on any external conditions. Emergency stop button A conspicuous red STOP button ensures easy and safe operation should there be a need to immediately halt printing. Integrated HEPA filter Independently tested to remove up to 95% of ultrafine particles to increase air quality peace of mind. 7-inch capacitive touchscreen Mounted higher to give a better view of the first layers when remote monitoring. Monitor your print in high resolution remotely via UltiMaker Digital Factory. H-bridge Gantry H-bridge gantry and direct drive head enable rapid dual material printing. Factor 4 Plus is capable of reaching up to 340°C on its print cores, 70 °C on the print chamber and 120 °C on its heated bed. Always up to date. With dual onboard processors, there is plenty of computing headroom for planned and even unplanned future updates. Specifications Category Item Specification Dimensions Build Volume 330 x 240 x 300 mm (13 x 9.4 x 11.8 inches) Assembled Dimensions 695 x 605 x 1287 mm (27.5 x 24 x 51 inches) Print Technology Fused Deposition Modeling (FDM) Compatible Filament Diameter 2.85 mm Weight 120 kg (265 lbs) Maximum Power Output 600 W Printer Properties Layer Resolution 60 – 400 microns (depending on print core nozzle size and selected print profile) XYZ Resolution 6.25, 7.8, 2.5 microns Feeder Type Dual-extrusion, direct drive print head and swappable print cores Display 7 inches interactive touchscreen (resolution 1024 × 600 px) Print Core Replacement Swappable print cores. This 3D printer ships with two AA+ 0.4 mm print cores and one CC+ 0.6 mm print core. Print Head Dual extrusion print head with an auto-nozzle lifting system, swappable print cores, and flood detection. Nozzle Diameters 0.25 mm, 0.4 mm, 0.6 mm, 0.8 mm Operation Parameters Filter Technology Replaceable HEPA H13 filter Nozzle Temperature 180 – 340 °C Build Plate PEI-coated flexible steel build plate Operating Ambient Temperature 18 – 30 °C (64 – 86 °F), Humidity: 30 – 70% RH Non-Operating Temperature 5 – 40 °C (41 – 104 °F), Humidity: 20 – 90% RH Ecosystem Supplied Free Software UltiMaker Cura – print preparation softwareUltiMaker Digital Factory – printer management software Supported OS MacOS, Windows, and Linux Supported File Types UltiMaker Cura: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNGPrintable formats: G, GCODE, GCODE.gz, UFP File Transfer Wi-Fi (2.4 and 5 GHz), Ethernet, USB Safety and Compliance Safety Features Red Stop Button for motion & heat sources immediate stop. Open Door Sensor for motion and extrusion pausing. Warranty Period 12 months Limited Warranty More Information Learn more about UltiMaker Factor 4 Plus safety and compliance.
