The thickness of the film: 0.15mmThe thickness of film with release liner: 0.31mmType of film: High grade polymeric calendered film with air release Adhesive: Henkel solvent-based acrylic adhesive, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dryRelease liner: Plastic linerStoring period: 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, clean and dry place. Important: the top protective layer should be removed before installation, and the film should be stored without the protective layer to prevent "tunneling."Indoor life: 4 years when followed rules of application and useOutdoor life: 3 years when followed rules of application and use (Zone1)Dimensional stability: shrinkage less than 2% Plastification: between 28%-38% Release Force(N/25mm), standard 0.08~0.20, result 0.12, temp 25°C 60% Initial Adhesion Force(g/25mm), result 972.48, temp 25°C 60% 180°Peel Strength(N/25mm), result 15.64, temp 25°C 60% Holding Force(h) (GB/T4851-1998, result, ≥425H, temp 25°C 60% Light Ageing in UV Exposure: Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005, Test result: 3-4, pass, Exposure cycle: ASTM D4329-13 cycle A, Lamp type: UVA-340, 8h UV at (60±2.5)℃ BPT, 0.89 W/ (m2•nm)@340nm, 4h condensation at (50±2.5)℃ BPT, Exposure duration: 44h Package: Roll width 152 cm, length 18 m, weight 13 kg Install tips: Application: from +16°С to +23°С, usage from -30°С to +50°СTools: Standard squeegee with a soft bufferConformability: smooth and medium curved surfaceDirectional: noOverlap width: 3-4mm Post heating: 95 Celcius Important note: The images, colors, and finishes on screen are approximate. For the real representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job as a slight batch to batch variation of color may occur. The film may scratch during the application or a day in and out use. The warranty does not cover the scratching of the film.