The Tucker Ultimate DIY Kit is a complete RO/DI pure-water system for spot-free window and solar cleaning. It makes and delivers near-zero-TDS water, so glass dries clean with no chemicals and no squeegee. It comes as a Single User or Dual User build. Key Features 4-stage RO/DI purification: Sediment, carbon, an RO membrane, and a DI polish take source water down to near-zero TDS for spot-free results. 12V RO booster panel: A 5.3 GPM, 90 psi bypass pump holds output up when source pressure is low or TDS runs high, where DI-only kits stall. Digital flow control and long-range remote: Adjust or shut off flow right from the pole, so you don't waste pure water. Single or Dual User: Dual User adds a second delivery panel, so two operators run off one purification system. Inline dual-probe TDS meter: Reads two water sources, so you know your purity before it hits the glass. First filter set included: Ships with a free replacement set of sediment, carbon, and DI filters. Tucker Ultimate DIY Kit Specifications Product type RO/DI pure-water production and delivery system Variants Single User (1 delivery panel) / Dual User (2 delivery panels) Purification 4-stage: sediment 2.5" x 10", carbon 2.5" x 10", Axeon 4" x 40" RO membrane, DI 4.5" x 10" Booster pump 5.3 GPM at 90 psi bypass Power 12V DC (Group 24 deep-cycle marine battery required, not included) Flow control V16 digital controller with long-range remote TDS meter Dual-probe inline Mounting Skid, truck, trailer, or van/shop build Chemical compatibility Pure water only. No chemicals, no SH. What's Included Tucker DIY 4-Stage RO/DI Kit: sediment, carbon, RO membrane, and DI filters, plus the housings, fittings, brackets, and tubing. Tucker 12V RO Booster Panel: 5.3 GPM, 90 psi bypass pump with a waterproof switch, a fuse block that takes added 12V wiring, and a dual-probe inline TDS meter. Tucker 12V Delivery Panel with digital controller and long-range remote: one for Single User, two for Dual User. Free first filter set: a replacement set of sediment, carbon, and DI filters. Not included, you supply: a 12V Group 24 deep-cycle marine battery and a 2-amp trickle charger, a hose and reel, a water-fed pole, and a pure-water holding tank. It mounts on a skid, van, trailer, or shop build, runs on 12V DC, and feeds any standard water-fed pole. How It Works Source water comes in and the 12V booster pump raises the pressure. The water then runs through four stages: a sediment filter, a carbon filter that strips chlorine and chloramine, an RO membrane, and a DI polish. What comes out is near-zero-TDS pure water that you store in your holding tank. The 12V delivery panel siphons that tank and pushes the water through your hose to a water-fed pole. You scrub and rinse, and the pure water dries spot-free with no squeegee. The booster keeps output steady when source pressure is low or TDS is high, the inline TDS meter shows your purity, and the long-range remote lets you cut flow right from the pole. It ships as a DIY kit, so you build it from the included parts using Tucker's tool list, written instructions, and video. Pairs Well With Tucker Water Fed Pole Tucker High Reach Water Fed Pole Kits Alpha Glide Brush Aluminum Hose Reel Sediment and Carbon Filter Frequently Asked Questions What's the difference between the Single User and Dual User Tucker Ultimate DIY Kit? Single User comes with one delivery panel, for one pole and one operator. Dual User comes with two delivery panels, so two operators can run off the same purification system. Both share the same 4-stage RO/DI setup and the RO booster. Does the Tucker Ultimate DIY Kit come with a battery, pole, or tank? No. It needs a 12V Group 24 deep-cycle marine battery and a 2-amp trickle charger, and neither is included. The hose and reel, water-fed pole, and pure-water holding tank are separate too. The kit makes and delivers the water. You supply the battery, tank, hose, and pole. Can I run SH or other chemicals through it? No. It's a pure-water system only. Chlorine, chloramine, soaps, and SH foul the RO membrane and burn through the DI resin. The carbon stage is there to strip chlorine before it reaches the membrane. Keep every chemical out of this system.
