UNI-100 is a 100% solid, two component, self-leveling epoxy coatings designed to restore floor concrete and improve their appearance. Advantages · Dense surface resistant to bacteria, moisture and is easy to clean.· May apply several layers onto itself with excellent adhesion.· Excellent adhesive properties allow application onto many different types of substrates. Primary Applications · Aircraft hangers· Assembly areas· Classrooms· Clean rooms· Laboratories· Areas of light manufacturing· Mechanical rooms· Walkways Packaging Resin (A): 12.3 KG: Hardener (B): 1.9 KG Color Grey Recommended Thickness (Primer) 6 - 8 mils Recommended Thickness (Finish Coat) 8 - 12 mils Coverage (80 mils)) 20 -25 ft2 / GAL Shelf Life 12 Months Mix Ratio, by Volume A: B = 12.3: 1.9 Mix Ratio, by Weight A: B = 5A: 1B Gel time (100g) 40 - 50 Minutes Solids Content 100% VOC (g/L) >30 g / L Advantages Ready-to-use single-component product Exceptional adhesion, does not require primer Drying: approximately 1 hour depending on application conditions More than 20 shades available on color chart and possibility of tinting on request Abrasion resistant Resistant to freezing and thawing UV resistant (does not yellow) Resistant to salt, oil, gasoline Non-slip Elasticity 100% Subsequent connections not visible Ecological product without odor (very low VOC rate) Application between 2 and 30°C Product warranty: 15 years Shelf life of the product in pot: +10 years Documentation UNI-SONO A Safety Data SheetUNI-SONO B Safety Data SheetTechnical Data Sheet