UNITRONIC AUDI RS3 2.5 TFSI PERFORMANCE SOFTWARE

Harrys Euro Verified independent store

→

UNITRONIC STAGE 1 : 476HP / 469LB-FT Description Performance Software Precisely Engineered for a completely stock car.Performance Software for your ECU Box Code is subject to avail ability. Installation Flashed directly through the (OBDII) Diagnostic port of your vehicle (10-15 minutes). UniCONNECT+ This vehicle has added support through UniCONNECT+ which allows you to program your own vehicle right in your own garage. Learn More Features Engineered with Strict Industry StandardsWith over 10 years of experience with Bosch and Siemens engine management systems and calibrations, Unitronic is able to utilize its expertise, industry leading tools and equipment to ensure an optimal calibration; delivering maximum performance, while maintaining complete OEM-like reliability and drivability. Extensively Tested Under Various Driving ConditionsDevelopment begins using Unitronic’s in-house Maha Chassis dyno housed in an environmentally controlled cell; closely monitoring a plethora of operational data, utilizing industry leading calibration tools and resources. Beta calibrations are then tested in street and track scenarios, using multiple cars under various driving conditions. This engine calibration strategy ensures Unitronic Performance Software delivers maximum performance, OEM-like drivability and reliability anywhere in the world. Unitronic Performance Software is only released to its Clients once development is thoroughly completed in accordance to Unitronic’s strict standards. Factory Safety Limiters RetainedOEM “fail safes” are retained within the ECU calibration. Close monitoring of all operation parameters ensures that engine operation stays within factory components limits, resulting in reliability. Optimized Responsiveness, Smoothness, Drivability, and ComfortUnitronic’s ECU calibrations are engineered to improve engine response and reduce low-end lag. Unitronic’s Performance Software has gained worldwide recognition and is well known for its broad powerband, with smooth power delivery, maximizing responsiveness and “area under the curve”, under normal and hard acceleration. Optimized Maximum OutputUnitronic’s ECU Calibrators deliver the maximum power output while staying within the operational limits of the factory engine and drivetrain components. Specifically, this results in the highest engine performance without sacrificing the reliability of the engine, turbocharger, or other engine and drivetrain components. Power Delivery Perfectly Optimized Throughout the Power BandAligned with the OEM strategy, the calibration is designed to offer a large flat torque plateau to provide a smooth and linear power band. Maximum torque output is achieved sooner and maintained longer which creates a broader torque plateau and greater area under the curve. This results in an improved acceleration and optimal engine operation. Improved Fuel EfficiencyOptimized timing and injection in cruising condition allows for an improved fuel efficiency, under normalized driving conditions. Ignition Timing Precisely Calibrated for Higher Octane FuelEngine calibration optimized to take advantage of higher fuel quality to extract maximum energy from the combustion. Therefore, when using a higher octane fuel, more power and better fuel efficiency will be achieved. Speed Governor RemovedVehicle speed limiter within ECU is removed. (Subject to transmission rotational speed limit.) Recommended Hardware Unitronic 3'' Turbo Inlet Elbow for 2.5 TFSI EVO UNITRONIC STAGE 1+ : 505HP / 496LB-FT Description Unitronic Stage 1+ Performance Software is precisely calibrated for use with 91 octane / 95 RON fuel, engineered for a completely stock car. It is the performance upgrade that will result in the most gains!Unitronic Stage 2 TCU Performance Software is required to run Stage 1+ ECU tune. Installation Flashed directly through the (OBDII) Diagnostic port of your vehicle (10-15 minutes). UniCONNECT+ This vehicle has added support through UniCONNECT+ which allows you to program your own vehicle right in your own garage. Learn More Features Engineered with Strict Industry StandardsWith over 10 years of experience with Bosch and Siemens engine management systems and calibrations, Unitronic is able to utilize its expertise, industry leading tools and equipment to ensure an optimal calibration; delivering maximum performance, while maintaining complete OEM-like reliability and drivability. Extensively Tested Under Various Driving ConditionsDevelopment begins using Unitronic’s in-house Maha Chassis dyno housed in an environmentally controlled cell; closely monitoring a plethora of operational data, utilizing industry leading calibration tools and resources. Beta calibrations are then tested in street and track scenarios, using multiple cars under various driving conditions. This engine calibration strategy ensures Unitronic Performance Software delivers maximum performance, OEM-like drivability and reliability anywhere in the world. Unitronic Performance Software is only released to its Clients once development is thoroughly completed in accordance to Unitronic’s strict standards. Factory Safety Limiters RetainedOEM “fail safes” are retained within the ECU calibration. Close monitoring of all operation parameters ensures that engine operation stays within factory components limits, resulting in reliability. Optimized Responsiveness, Smoothness, Drivability, and ComfortUnitronic’s ECU calibrations are engineered to improve engine response and reduce low-end lag. Unitronic’s Performance Software has gained worldwide recognition and is well known for its broad powerband, with smooth power delivery, maximizing responsiveness and “area under the curve”, under normal and hard acceleration. Optimized Maximum OutputUnitronic’s ECU Calibrators deliver the maximum power output while staying within the operational limits of the factory engine and drivetrain components. Specifically, this results in the highest engine performance without sacrificing the reliability of the engine, turbocharger, or other engine and drivetrain components. Power Delivery Perfectly Optimized Throughout the Power BandAligned with the OEM strategy, the calibration is designed to offer a large flat torque plateau to provide a smooth and linear power band. Maximum torque output is achieved sooner and maintained longer which creates a broader torque plateau and greater area under the curve. This results in an improved acceleration and optimal engine operation. Improved Fuel EfficiencyOptimized timing and injection in cruising condition allows for an improved fuel efficiency, under normalized driving conditions. Ignition Timing Precisely Calibrated for Higher Octane FuelEngine calibration optimized to take advantage of higher fuel quality to extract maximum energy from the combustion. Therefore, when using a higher octane fuel, more power and better fuel efficiency will be achieved. Speed Governor RemovedVehicle speed limiter within ECU is removed. (Subject to transmission rotational speed limit.) Recommended Hardware Unitronic 3'' Turbo Inlet Elbow for 2.5 TFSI EVO UNITRONIC STAGE 2 : 554HP / 527LB-FT Description Unitronic Stage 2 (93 octane) Performance Software is precisely calibrated for use with 93 octane / 98 RON fuel, engineered for a vehicle that has full hardware bolt-ons. It is the performance upgrade that will result in the most gains!Unitronic Stage 2 TCU Performance Software is required to run Stage 2 ECU tune. Installation Flashed directly through the (OBDII) Diagnostic port of your vehicle (10-15 minutes). UniCONNECT+ This vehicle has added support through UniCONNECT+ which allows you to program your own vehicle right in your own garage. Learn More Features Engineered with Strict Industry StandardsWith over 10 years of experience with Bosch and Siemens engine management systems and calibrations, Unitronic is able to utilize its expertise, industry leading tools and equipment to ensure an optimal calibration; delivering maximum performance, while maintaining complete OEM-like reliability and drivability. Extensively Tested Under Various Driving ConditionsDevelopment begins using Unitronic’s in-house Maha Chassis dyno housed in an environmentally controlled cell; closely monitoring a plethora of operational data, utilizing industry leading calibration tools and resources. Beta calibrations are then tested in street and track scenarios, using multiple cars under various driving conditions. This engine calibration strategy ensures Unitronic Performance Software delivers maximum performance, OEM-like drivability and reliability anywhere in the world. Unitronic Performance Software is only released to its Clients once development is thoroughly completed in accordance to Unitronic’s strict standards. Factory Safety Limiters RetainedOEM “fail safes” are retained within the ECU calibration. Close monitoring of all operation parameters ensures that engine operation stays within factory components limits, resulting in reliability. Optimized Responsiveness, Smoothness, Drivability, and ComfortUnitronic’s ECU calibrations are engineered to improve engine response and reduce low-end lag. Unitronic’s Performance Software has gained worldwide recognition and is well known for its broad powerband, with smooth power delivery, maximizing responsiveness and “area under the curve”, under normal and hard acceleration. Optimized Maximum OutputUnitronic’s ECU Calibrators deliver the maximum power output while staying within the operational limits of the factory engine and drivetrain components. Specifically, this results in the highest engine performance without sacrificing the reliability of the engine, turbocharger, or other engine and drivetrain components. Speed Governor RemovedVehicle speed limiter within ECU is removed. (Subject to transmission rotational speed limit.) Left Foot Braking (LFB) EnabledLFB allows users to apply load on the engine using their left foot on the brake, to build boost when the edge is needed at the race track. Spark-based "Motorsports" Style Rev-limiter EnabledThe traditional rev limiter will de-load of the engine as engine speed reaches maximum RPM. Unitronic has enabled the spark-based rev-limiter, to avoid the de-loading, allowing power all the way to the rev-limiter. Exhaust Crackle/Overrun EnabledUnitronic has recalibrated the Exhaust Crackles/Overrun/Pops & Bangs when in Dynamic/Sport Mode to be more aggressive and louder. Exhaust Flaps Always Open in Dynamic/Sport ModeIn factory form, both Exhaust Flaps are not open when in Dynamic/Sport Mode. Unitronic enables both Exhaust Flaps to be open at all times, when in Dynamic/Sport Mode, for maximum performance and sound. Required Hardware Unitronic 3'' Turbo Inlet Elbow for 2.5 TFSI EVO Upgraded Downpipe w/ Sports Catalyst Intercooler Upgrade Upgraded Intake System 3" or 4" Turbo Inlet Elbow Recommended Hardware 2.5TFSI EVO Spark Plug Set (NGK R7437-9) by Unitronic Related Hardware Unitronic MPI Injector Upgrade Kit for 2.5TFSI EVO Please note that specific files are available for vehicle equipped with upgraded injectors. Show more