Stage 1 - 245 HP / 280 LB-TQ ( +45 HP / +73 LB-TQ ) Performance Software Precisely Engineered to Run 16psi of Boost on a Completely Stock Car. For 91 octane fuel Stage 1+ - 260 HP / 295 LB-TQ ( +60 HP / +88 LB-TQ ) Performance Software Precisely Engineered to Run 18psi of Boost on a Completely Stock Car. Ignition Timing Precisely Calibrated for 93 Octane Fuel Stage 2 - 280 HP / 325 LB-TQ ( +80 HP / +118 LB-TQ ) Required Hardware Upgraded Downpipe Recommended Hardware Cold Air Intake or Short Ram Cat Back Exhaust System Performance Software Precisely Engineered to Run 20psi of Boost Ignition Timing Precisely Calibrated for 93 Octane Fuel Precisely Calibrated for an Upgraded Exhaust System (Go Green - Use a Catalytic Converter) Optimized for a High Flow Catalytic Converter Spark-based Launch Control Available for 6spd Manual Transmission equipped vehicles 3800-4200 or 4500 RPM launch control setpoint (user selectable), 5PSI (0.4 Bar) of boost off Launch Control Traction Control (TC) must be disabled to engage LC Installation Flashed directly through the (OBDII) Diagnostic port of your vehicle (10-15 minutes). UniCONNECT+ This vehicle has added support through UniCONNECT+ which allows you to program your own vehicle right in your own garage. Learn More Features for all Stages Engineered with Strict Industry Standards Extensively Tested Under Various Driving Conditions Factory Safety Limiters Retained Greatest Power and Torque Gains in the Industry, Guaranteed! Optimized Responsiveness and Drivability Optimized Smoothness and Driving Comfort Power Delivery Perfectly Optimized Throughout the Power Band Improved Fuel Efficiency Speed Governor Removed RPM Limiter Increased to 7100 Cold Weather Start and Warm up Improved Lower End Hesitation (Lag) Removed UniCONNECT+ Description UniConnect+ is a Programming and Diagnostic Interface which gives users the freedom to reflash their Engine Control Unit (ECU) or Transmission Control Unit (TCU) from the comfort of their own garage. With the ability to upgrade the Unitronic Performance Software, flash back to stock, and also perform diagnostics, UniConnect+ is a complete end-user programming and diagnostic interface that provides control over your vehicle. Simple Installation UniCONNECT+ gives you the freedom to effortlessly install your Unitronic Performance ECU and DSG Software from the comfort ?of your own garage.* Change Software Maps Quickly and Easily re-flash your ECU with Performance Software maps designed and specifically calibrated to suite the hardware and fuel modifications or fuel grade used. Data Logging Gathering high resolution data is made easy with Unitronic’s pre-configured channel loadouts for fast and effortless troubleshooting and data logging.** Simple back to factory restauration UniCONNECT+ makes it painless to revert your ECU back to it’s stock calibration within minutes.* Advanced Settings Enable optional advanced settings such as Launch Control or No Lift Shifting within minutes. Enable Gear display in MFG for DSG Software owners.* Technical Specifications Minimum System Requirements: Operating System: Microsoft Windows 7 Internet Explorer 11 Screen Resolution: 1024x768 Processor: 1.5 GHz or higher Memory (RAM): 4GB or more For optimal application performance: Operating System: Microsoft Windows 7 or higher Internet Explorer 11 or newer Screen Resolution: 1024x768 Processor: 2.0 GHz or higher Memory (RAM): 8GB or more Internet access is required. *Some exclusions apply. Only available for select engines. Contact Unitronic or a Unitronic Authorized Dealer for more information. **Feature in development. IMPORTANT NOTE! Uniconnect Cables are NON-REFUNDABLE. Once assigned to your car they cannot be returned!
