The FlubRC 1/18th C-Series Cab is compatible with the TRX-4M. We recommend the lay down servo mount with this body. This model also comes with our new gm-C type grill. Our new C-Series Cab has been fully prototyped and mastered for the 1/18th scale wheelbase. The body has been Pinched for performance, yet keeping all of the scale parts including the Grill with clear Lens that take 3mm LEDs, Dash with Steering Wheel, and Diamond Stiched Seats. MagSliderz mounting system has been completely re-worked. All of our 1/18 body's will use the same MagSliderz, and we now have 8 options: 🟢 0° for stock chassis or any chassis that uses a stock type skid and utilizes a 0° skid angle. 🟢 3.5° Angled Skid - recommended for Meus chassis 🟢 6° JEC EVO18 Specific 🟢 6.5° DBRC Gila 🟢 6-8° Angled Skid - Leved at 6° this is an additional option if using the full skid angle available on 6-8° chassis. 🟢 10° Juice 🟢 12° KingSnake 🟢 12° Barrage CR18 For gluing parts to the body, you can use a CA glue, or my favorite is Shoe Goe or e6000. The rubbery type glue helps with impacts and is also great for Magnets. CarbonFiber colors have a print quality increase, including higher temp and impact resistance. It also provides a textured matte finish, the raw prints can be painted without prep if desired. For normal paint preparation, we recommend starting with 220 Wet Sand with a flexible block, then move to 320 Wet Sand. Use a high fill sandable primer, and wet sand with 400, repeat last step until desired finish is achieved before base coat. When choosing a color and planning to paint, you have options! You can pick the same color as your paint, so scratches will be less visible!Bodies do require prep if planning to paint. For prep we reccomend starting with 220 Wet Sand with a flexible block, then move to 320 Wet Sand. Use a high fill sandable primer, and wet sand with 400, repeat last step until desired finish is achieved. ***All products are made to order. Please check the header on the main page for approximate lead times. Thank you for your support and patience - FlubRC This product or service is not affiliated with, endorsed by, or associated with Traxxas, L.P., or its products and services.
