RC FABRICATION — UPGRADED STEERING CLEVIS BOLTS Price is for one (1) pair. Shipping included anywhere in the U.S. These upgraded steering clevis bolts are designed for vehicles running aftermarket clevis-style steering systems, where increased load and stress exceed the limitations of factory-style hardware. Applications such as larger tire sizes, extended track width, and aggressive off-road use significantly increase steering loads. In these conditions, standard clevis bolts can become a failure point. Common failure modes of factory-style hardware include: • Material deformation or thread damage due to lower-strength stainless construction• Insufficient thread engagement within the steering rack These upgraded bolts are engineered to address both issues. FEATURES AND BENEFITS Heat-Treated 4340 Chromoly Steel Manufactured from heat-treated 4340 chromoly steel for high strength and durability under load. • Higher tensile strength compared to typical stainless hardware• Improved resistance to thread deformation and galling• Suitable for high-load steering applications and impact environments Increased Thread Engagement (¼” Longer) Extended length improves engagement within the steering rack, increasing load distribution across threads. • Extends approximately 3/4” past the clevis face• Compared to approximately 1/2” on typical factory-style bolts• Increased engagement reduces the likelihood of thread failure under load AVAILABLE SIZES • 14mm• 22mm• 24mm Select the appropriate size based on your clevis and steering rack configuration. FITMENT AND COMPATIBILITY Compatible with: • Dirt King steering clevis kits• Camburg steering clevis kits• Long-travel and mid-travel suspension systems• Custom clevis-based steering configurations utilizing the listed sizes Recommended for vehicles operating under increased steering demand, including: • Larger tire sizes (35” and above)• Increased suspension travel and track width• Frequent off-road use or high-impact driving conditions WHAT’S INCLUDED • (2) Upgraded steering clevis bolts (one complete pair) Shipping is included within the United States. INSTALLATION NOTES • Ensure steering rack threads are clean and undamaged prior to installation• Install using appropriate hand tools; avoid impact tools• Apply threadlocker as required based on application• Torque to manufacturer-recommended specifications for your steering setup If existing rack threads show signs of damage, repair is required prior to installation. DISCLAIMER This is an aftermarket performance component intended for off-road use. Proper installation and maintenance are required. RC Fabrication assumes no liability for damage resulting from improper installation, misuse, or unsafe operating conditions. APPLICATION This product is intended for users who demand increased reliability from their steering system under elevated load conditions. It is a direct solution to known limitations in factory-style clevis bolt hardware when used beyond stock parameters.
