Upper Control Arm Eccentric Washers

T3 Technique Verified independent store

→

When installing upper control arm bushings, it is imperative that the correct eccentric washers are used, especially on a Syncro. These new washers come in the same three thickness es that the factory offered. A maximum play of 0.5mm is allowable on each side between the bushing’s inner sleeve and the eccentric washer when the bolt is loose. Play is adjusted via the thickness of the eccentric washers. The following eccentric washers are available to adjust to the proper clearance: 2.5mm 3mm 4mm 5mm 5.5mm Show more