Used Table Piano Hinge- 36" L X 1 1/2" W (width when open) USED PART DISCLAIMER: ** Please Read Full Product Description Before Purchasing** All used parts are from dismantled RV trailers or Motorhomes. If inventory is greater than 1 , It is possible the part is not the exact one displayed in the picture. But is the same part. Every Part is tested %100 While in the trailer before being stripped. Every part is in perfect working order unless otherwise stated in the description. USED PART RETURN DISCLAIMER: All Used Parts are final sale (NO REFUNDS) For shipping damages, or wrong part received please email back to the order confirmation email. USED SHIPPING DISCLAIMER: all used parts are shipped within 1-2 days of order being placed. Shipping carriers include: Canada post, Purolator, UPS Shipping insurance is up to purchaser. If shipping to the United States Brokerage and duty fees are paid by the customer. Instructions Place the table upside down on a bench with the end even with (or slightly extended over) the edge. Hang the rod on the table and center. Place the J-3 catch brackets over the rod ends and with the lip of the bracket held up against the table, screw in place. In all instances leave enough space between the edge of the brackets and rod bends to minimize binding. With the rod in the same position, turn the table over and place on cleats up against the wall. NOTE: The J-4 brackets must be held in position firmly on the hinge rod when mounting. Raise the table to the up position and place the J-1 catch plates over the exposed ends of the rod catch bracket and center. Bring the catches down as far as feasible (if possible to the top of the table) and fasten the two top holes to the wall. Since the bottom holes are normally below the top of the table, it is necessary to drop the table to the down position to complete this fastening of the catch plates to the wall.
