Fits: Axial 1/18th Scale UTB18 Crawler Buggy Modifications Required: Trim Small screw hole tabs off for stock battery tray. Items are printed In Black This LCG Battery tray accommodates the space required for the HC Skid plate. The tray is also angled to all for a deeper droop up from if you modify the cage for servo clearance. Additionally we have added wire management tabs that you can use small Zip Ties to secure your wiring up front. To mount, simply unscrew the stock battery tray, trim off the stock screw holes, remove the two cage support screws above the tab slots. Using the provided M2.5x10 counter sunk screws, install the LCG battery tray with your driver. The hole in the battery tray allows access to the screw heads from under the nose just before the shock body. You can angle the driver to finish the install. We used the MIP bits for a perfect fit. Due to the nature of 3D printing, items may contain tiny visual blemishes. Items may require some trimming and painting for optimal visual appeal/fit; similar to what you would expect to do with model parts. IMPORTANT: Do not use power drivers on 3D printed parts. Over tightening printed parts and cause premature cracking and crushing. Always ensure you hardware will not bottom out in the screw pocket. This can also cause at 3D printed part to break prematurely. Printed Parts - These parts will be printed in Black (Unless otherwise requested) using advances slicing methods for maximum strength. All 3D printed parts come with a lifetime replacement guarantee. If you break a part, simply send us a photo and your order number. The photo is simply to evaluate for common issues and help identify potential improvements to existing designs. Contact us @ [email protected] or PM us @ Spare-Time Hobbies on Face Book.
