UV DTF FACE MUG WRAP Create a fun customized mug in minutes with our premium UV DTF Face Mug Wraps! These ready-to-apply transfers feature vibrant, detailed designs and make customizing quick and easy with no heat press, weeding, layering, or special equipment required. PRODUCT DETAILS Includes ONE (1) UV DTF face mug wrap Designed for compatible smooth, hard-surface mugs Premium full-color UV DTF print Strong permanent adhesive No heat press required No weeding or layering Easy peel-and-apply application Mug is NOT included HOW TO APPLY Make sure your mug is completely clean, dry, and free of oils, dust, or fingerprints. Before removing the backing, position the wrap on the mug to check placement and fit. Carefully remove the backing from the transfer. Align the wrap before allowing the adhesive to make full contact. UV DTF adhesive is very strong and cannot easily be repositioned once applied. Slowly apply the wrap while pressing from the center outward to minimize bubbles and wrinkles. Firmly rub over the entire design using your fingers or a squeegee to ensure good adhesion. Slowly peel away the clear carrier film. If any portion of the design begins to lift, lay the film back down, rub firmly, and continue peeling slowly. For best results, allow the finished mug to sit for 24 hours before washing. CARE INSTRUCTIONS Hand wash only with mild soap and water. Do not soak. Do not scrub the design with abrasive materials. Not recommended for dishwasher or microwave use. PLEASE NOTE Mug sizes, shapes, and surface finishes can vary by manufacturer. Always check the wrap against your mug before application to confirm placement and fit. UV DTF transfers use a strong permanent adhesive. Please take your time during placement and application. Creations With Purpose is not responsible for transfers damaged due to incorrect application, placement, or improper care. Colors may vary slightly due to differences in monitors, screens, and the finished surface.
